VCDS and OBD diagnostic device in the On-Board Diagnostics Shop
Diesel, Engine Technology and Vehicle Technology. Repair, Maintenance and Diagnostics (OBD).

Blaumann Test

 
 Become a Blaumann 
By correctly answering the following questions you will become a member of the 'Blaumänner' user group.
At least 3 helpful posts and one "thumbs up" are required to participate.
You will then be able to read and write in all forums without restrictions. Please select the correct answer and click 'Submit'.
If a diesel engine is hard to start, the problem could be...
1) diesel engines start poorly especially below 0°C
2) the clutch is slipping
3) there is diesel in the engine
4) air in the injection system
Answer:

How much current flows approximately through a commonly installed glow plug?
1) ~2 Volts
2) ~20 Amperes
3) ~50 Amperes
4) ~12 Volts
Answer:

Diesel pre-chamber engines need glow plugs for cold starting because...
1) the injection pressure is not high enough
2) the chamber surface removes too much heat
3) the injection pressure is too high
4) pre-chamber engines do not need glow plugs
Answer:

The glow plug has the characteristic of a PTC. That means...
1) at increased temperature, the resistance increases
2) at increased temperature, the resistance stays the same
3) at increased temperature, the resistance decreases
4) with greater resistance, it heats up more
Answer: