UDS Data: Hiding the Origin?

HI.

This probably applies more to Uwe.

Saving a collection of measurement values from a UDS ECU no longer indicates the source of those values.

Neither the filename nor the content indicate that I should.

Quote:

Address 08: Climate Control/Heating (J255) Label file: RKS\5K0-907-044.clb Part number SW: 5K0 907 044 BD, Part number HW: 5K0 907 044 BD. Component: Climatronic Part number: H14 0608 Revision: 00003001 Encoding: 0000000000 Operating number: WSC 01357 011 00200 ASAM Dataset: EV_Climatronic A01001 ROD: EV_Climatronic_VW46.rod

here, which I have read.

Code:

Sonntag,20,Mai,2012,13:57:50:31600 VCDS Version: RKS 11.11.3 Datenstand: 20120406 13:57:40   5.4 Nm   Kompressorlast 003   75.6 %   Gebläselast vorn 004   0.610 A   Kompressorstrom; Istwert 008   0.600 A   Kompressorstrom; Sollwert 009   33.2 %   Kühlerlüfteransteuerung Istwert 010   33.2 %   Kühlerlüfteransteuerung; Sollwert 011   Automatische Umluft aktiv    Status Umluft 013   0 W/m²   Sonnenintensität rechts 018   0 W/m²   Sonnenintensität links 019   1000 /min   Kompressordrehzahl 021   10.8 bar   Kältemitteldruck 023   4.3 °C   Temperatur nach Verdampfer 042

Am I doing something wrong, or is this a suggestion to improve VCDS?

m;

Thank you very much for the tip!