P0341 - Camshaft Position Sensor (G40): Implausible Signal

Author

Message

dieselschrauber
Administrator

Joined: 04/12/2002
Posts: 18083
Karma: +797 / -0

Location: St.Gallen
2018 Volkswagen T6 Consumption

26-04-2016, 14:55 Subject: P0341 - Camshaft Position Sensor (G40): Implausible Signal	Quote

Error codes: 16725/P0341/000833 - Camshaft sensor (G40): Implausible signal Possible Symptoms: - MIL warning light in the cockpit is illuminated Possible Causes: - Faulty/Damaged wiring to the G40 camshaft sensor - Camshaft sensor G40 faulty/damaged - Camshaft adjusted/misaligned (Valve timing not correct) See also: Dipl.-Ing. (FH) Rainer Kaufmann - Original VCDS mit KPower, KDataScope und Dieselschrauber Support Translated on 03-07-2026, 15:19.

Ratings - P0341 - Camshaft Position Sensor (G40): Implausible Signal

Average rating: 0.00 - worst rating: 0 - best rating: 0 - number of ratings: 0 - View ratings

You are not authorized to rate this topic. Danke sagen

Topic		Forum
Similar articles and topics
	P246E - Exhaust Gas Temperature Sensor (EGS) Bank 1 Sensor 4	General Tips
	Intake Air Temp Sensor P0110: Causes & Fixes	General Tips
	ASV Error: 'Engine Speed Sensor G80 - No Signal'	Faults & Documentation (Audi, VW, Seat/Cupra, Skoda)
	Intake manifold flap position - implausible signal	Diesel Engine Technology
	Speed Signal: Unlikely or Suspicious?	Diesel Engine Technology
	Signal too slow, signal too fat 3.0 TDI CTBA	Diesel Engine Technology
	Audi camshaft sensor - broken wire?	Diesel Engine Technology

You cannot post new topics in this forum.

P0341 - Camshaft Position Sensor (G40): Implausible Signal (Solution)