VP37 Compatibility: ESP vs. Other Brands

hello,

"I have an ESP (Electronic Stability Program) in my Golf 1z with the part number 028 130 109 H and HDK sensors, and it has an 8-pin connector. I've read that there are several other pumps that are supposedly compatible with mine, such as the 028 130 110H, and allegedly other types as well."
where can I find out exactly which ones still fit in my 1z? I've already cleaned my MSW once, but the jerking is starting to come back .

"Thank you."
Sure, here is the translation of the text from German to English:

"Hello"

martin

028 130 109 H = VE4/10E2250R510

These should definitely fit:

028 130 110 H = VE4/10E2250R510-3
028 130 110 HX

028 130 115 M=
028 130 115 MX

Ford.

95VW 9A543 DA
95VW 9A543 BA
95VW 9A543 AA
RM95VW 9A543 DA
1 100 802
1,072,298


Bosch part number: 0 986 440 505

hello,

Thank you for your help. I might try cleaning the MSW again, but I don't think it will ultimately solve the problem. The Bosch service representative told me that if any part of the pump has wear, it's a never-ending story. I "stupidly" asked a question when I bought some seals.

I'm always keeping an eye out for a gas station.


Sure, here is the translation of the text from German to English:

"Hello"

martin

Yes, there's plenty of information available on that topic, including from Bertil. If you clean the MSW (presumably a machine or component), you're addressing the symptom, not the cause. The contaminants are worn-out material, which leads to larger leaks and, sooner or later, other problems. It's poorly designed.