VCDS and OBD diagnostic device in the On-Board Diagnostics Shop
Diesel, Engine Technology and Vehicle Technology. Repair, Maintenance and Diagnostics (OBD).

Boost Pressure Limit Reached (BLS) (Solution)

 
New Topic Reply 🔗 ⭐ 🖨 Dieselschrauber - Index » Faults & Documentation (Audi, VW, Seat/Cupra, Skoda)
Author Message
vagtuning
Guest




 


Free account, no CAN development support

Post05-02-2011, 15:40    Subject: Boost Pressure Limit Reached (BLS) Quote

It could be caused by a leak in the vacuum hose connected to the turbocharger.
It can also occur very sporadically.

Testing with a vacuum pump to determine if the can maintains its internal pressure for an extended period.
For vehicles manufactured from 2008 onwards, the battery can be replaced individually.

Vacuum sensor: 03G 198 716
Disposable setting gauge: 03G 012 233.

Information on assembly and adjustment can be found in the technical documentation.
to be found (in the repair manual). Chapter: Replacing and adjusting the ATL.


Translated on 24-09-2026, 2:27.
Back to top

Ratings - Boost Pressure Limit Reached (BLS)

Average rating: 5.00 - worst rating: 5 - best rating: 5 - number of ratings: 1 - View ratings

You are not authorized to rate this topic. Danke sagen
New Topic Reply 🔗 ⭐ 🖨 Dieselschrauber - Index » Faults & Documentation (Audi, VW, Seat/Cupra, Skoda)
Similar articles and topics
Topic Forum
No new posts Boost pressure control exceeded 3.0 bar, P0299 code / rou... Faults & Documentation (Audi, VW, Seat/Cupra, Skoda)
No new posts Boost Pressure Limit Reached Diesel Engine Technology
No new posts Audi A6 3.0 V6 TDI BMK - Turbocharger boost pressure limi... On-Board Diagnostics (OBD)
No new posts Audi A4 2.0 TDI, BPW Turbocharger Boost Pressure Limit Ex... Diesel Engine Technology
No new posts Boost pressure limit error code: 17965 - Test drive log On-Board Diagnostics (OBD)
Jump to:  
You cannot post new topics in this forum.