VCDS and OBD diagnostic device in the On-Board Diagnostics Shop
Diesel, Engine Technology and Vehicle Technology. Repair, Maintenance and Diagnostics (OBD).

Greetings from the Netherlands (Weblog Metalli)

 
Dieselschrauber - Index
Viewing profile: Metalli
Avatar All about Metalli


Joined:  05/19/2012
Total posts:  2
[0.00% of all posts / 0.00 posts per day]
Show all posts by Metalli
Location:  nähe Venlo
Website: 
Occupation:  Glasfasermontage
Interests:  Auto, PC, Holzbearbeitung, Elektronik, Musik hören
Karma:  +0 / -0 (Please rate the user's posts!)
Quiz points:  0
Support Package:  Free account, no CAN development support
Contact Metalli
Email Address:   
Private Message:  PM
Weblog - Metalli
Post19-05-2012, 20:32    Subject: Greetings from the Netherlands Quote

I'm Bernd from the Netherlands, and I'm aiming for a score of 51.
After owning two Audi 80s, I once treated myself to an A4, and I regretted it right from the first oil change; it's such a bulky car compared to the 80.
After dealing with cavities in the timing belt and having to replace 20 valves, I was pretty fed up with that car and wanted something more familiar, something that could even be repaired with a hammer if necessary.
Said, searched, done... I am once again the proud owner of an Audi 80, Type 89, B3.
The great thing about this car is its manufacturing year, 1986, which means it is completely exempt from taxes in the Netherlands.
Unfortunately, it's a gasoline engine, and I don't want to convert it to run on gas because the extra tank would take up almost all of the trunk space.
That's why I had the idea of converting it to run on diesel.
A donor vehicle has already been found and stripped down... it's a 1.6 TD engine... why that one? Because I can simply install it without any welding, and because it still had a lot of extras that I wanted.
I certainly have a few questions about that icon_wink.gif, but unfortunately, I can't create a topic yet because I don't have VCDS or something similar, which is probably a requirement to be able to post.
I hope that changes.
All the best for now, and best regards.

Bernd.
Schönen Gruss

Bernd


Translated on 08-09-2026, 0:28.
Back to top
Profile PM  
Post21-05-2012, 20:38    Subject: Greetings from the Netherlands Quote

It's kind of boring here.
What's the point of having the best forum if you can't participate in it?
Why would someone need to own VCDS if they don't actually need it?
Or could it be that there's another reason why I can only write things here?

Regards,

Bernd.
Schönen Gruss

Bernd


Translated on 08-09-2026, 0:30.
Back to top
Profile PM  
Avatar-DieselBär30x
Post21-05-2012, 20:54    Subject: Greetings from the Netherlands Quote

Hi Bernd!

First of all, a warm welcome to our DieselForum! icon_wink.gif

First of all: Contact the administrator dieselschrauberViewing profile: dieselschrauber of this platform. There, you can purchase a "SupportKey" or, if you have a genuine and real interest in the subject, perhaps negotiate a price. icon_cool.gif
Basically, only customers of Kaufmann Automotive GmbH are allowed to post.
EDIT: ...and/or, of course, with a valid German VCDS license or a Bavarian Technic license!


The restriction was implemented because, despite the efforts of many active moderators, it was no longer possible to maintain the quality of the forum due to various other factors.
So, it definitely isn't targeted at newcomers, but rather represents an (still) active emergency brake.

Best regards from Munich!
1. S.verlängerung: Audi A4 Avant quattro, 1,9 TDi MKB: AFN, BJ98, Vollausstattung, +VP1L
2. Moped BMW K1200RS, 130 PS, BJ98, Vollausst.
3. T5 1,9 TDI PD (AXC), BJ04 - nur Ärger!


Translated on 08-09-2026, 0:32.
Back to top
Profile PM  
Reply 🔗 🖨 Dieselschrauber - Index » Community Blogs, Personal Websites
Jump to:  
You cannot post new topics in this forum.