P0046 - Turbocharger Boost Control Circuit Malfunction, Magnetic Valve Area (Solution)

Author

Message

dieselschrauber
Administrator

Joined: 04/12/2002
Posts: 17996
Karma: +782 / -0

Location: St.Gallen
2018 Volkswagen T6 Consumption

03-08-2017, 15:31 Subject: P0046 - Turbocharger Boost Control Circuit Malfunction, Magnetic Valve Area	Quote

Error code P0046 - Turbocharger Overboost Control Circuit Malfunction indicates a problem with the boost control solenoid valve. Either the solenoid valve/actuator is electrically or mechanically faulty, or there is a defect in the electrical wiring or connectors. Caution: The turbocharger pressure may become too high (risk of damage to the turbocharger or engine) or too low, as proper regulation is not guaranteed. The following error codes are related: P0045, P0047, P0048, and P004A. Dipl.-Ing. (FH) Rainer Kaufmann - dieselschrauber VCDS Shop

Ratings - P0046 - Turbocharger Boost Control Circuit Malfunction, Magnetic Valve Area

Average rating: 0.00 - worst rating: 0 - best rating: 0 - number of ratings: 0 - View ratings

You are not authorized to rate this topic. Danke sagen

Topic		Forum
Similar articles and topics
	Faulty solenoid valve for turbocharger pressure regulation	Faults & Documentation (Audi, VW, Seat/Cupra, Skoda)
	P0110 - Einlasslufttemperatur Sensor 1 Stromkreis	General Tips
	P2100 - Throttle Body Control Motor Circuit Malfunction	Faults & Documentation (Audi, VW, Seat/Cupra, Skoda)
	Magnetventil Ladedruckregelung u. Leistungsverlust (A3 TDI)	Diesel Engine Technology
	Lambda sensor control (electrical) (Fault in the electric...	On-Board Diagnostics (OBD)
	Is there a malfunction in the power circuit of the PD unit?	On-Board Diagnostics (OBD)
	P0672 / P0673 elektrischer Fehler im Stromkreis, Glühker...	Diesel Engine Technology

You cannot post new topics in this forum.