Oil Pan Plug Tricks: Easy Removal Tips

Hi.

I've been lying under the oil pan for half a day and I can't get these two stupid screws into the flywheel (the ones that require a torque wrench... if you can even get them properly aligned).

How did you do that?
Can anyone give me some tips on how to get those things inside?

Thank you.
m;

Hello.
Do you also have the correct screws? The two screws that go in there have an internal Torx recess and can be tightened with a Torx screwdriver.
Good luck.
Benno.

I need to correct myself: It's not a Torx screw, but an Allen screw.
You need to use a round-head Allen key.

Benno.

Everything is neither/nor. And it was finished tonight .

The screws had a SW10 (socket wrench) size on the outside and a Torx 40 size on the inside.

To make sure these two "stupid" things fit together properly, I bought new ones.

They only have SW10 available externally.

(I had Allen wrenches for my Golf 2.)

"Nevertheless, thank you."
m;