VCDS and OBD diagnostic device in the On-Board Diagnostics Shop
Diesel, Engine Technology and Vehicle Technology. Repair, Maintenance and Diagnostics (OBD).

Motor Target Values in Tables

 
New Topic Reply 🔗 ⭐ 🖨 Dieselschrauber - Index » Diesel Engine Technology
Author Message
ulf
Profi-Schrauber
Profi-Schrauber


Joined: 04/13/2002
Posts: 11058
Karma: +18 / -0   Thank you, like it!
Location: Saarland
2023 MG ZS
Premium Support

Post12-01-2003, 21:33    Subject: Motor Target Values in Tables Quote

Hello everyone.

after Michael II, through an almost endless amount of work (thank you again on behalf of all those who benefit icon_biggrin.gif), has compiled the target data and error codes for most engines into the error database...
What do you think about compiling the information in topic-specific tables (e.g., target data for all engines, etc.) and making it available as a link on Rainer's website?

That would free up a significant amount of space in the error database, which now seems a bit cluttered to me.
Furthermore, it would be possible to compare the different engines at a glance, which could potentially provide additional insights into their design and other aspects.

However, I am not available to create the tables. Perhaps someone else might be willing to take on this (tedious) task.
Gruß Ulf
_________

MG4 Electric


Translated on 26-09-2026, 22:38.
Back to top Profile PM Garage
Michael II
Profi-Schrauber
Profi-Schrauber


Joined: 04/12/2002
Posts: 1132
Karma: +3 / -0   Thank you, like it!
Location: Stuttgart

Support

Post12-01-2003, 22:16    Subject: Motor Target Values in Tables Quote

Hello,

In principle, I could put that together.
Tschüss

Michael II


Translated on 26-09-2026, 22:40.
Back to top Profile PM
Arne
Guest




 


Free account, no CAN development support

Post13-01-2003, 10:44    Subject: Motor Target Values in Tables Quote

Good idea, maybe include data from the transmission as well?

Could this PDF perhaps be helpful?

http://media.seat.com/en/ginebra02/aleman/degeneva.pdf

Regards,
arne


Translated on 26-09-2026, 22:40.
Back to top
ulf
Profi-Schrauber
Profi-Schrauber


Joined: 04/13/2002
Posts: 11058
Karma: +18 / -0   Thank you, like it!
Location: Saarland
2023 MG ZS
Premium Support

Post13-01-2003, 21:54    Subject: Stupid People: Are They Always the Same? Quote

Michael II wrote:
Hello,
Basically, I could put that together.


Hi Michael,

Actually, I had the least in mind to involve you, because you were already doing all the work with the writing icon_sad.gif.

Copy the data from the error database and transfer it offline to an Excel spreadsheet or something similar – maybe someone else could do that, so that the useful collections of information don't always come from the same small group of people icon_rolleyes.gif.
Gruß Ulf
_________

MG4 Electric


Translated on 26-09-2026, 22:41.
Back to top Profile PM Garage
Michael II
Profi-Schrauber
Profi-Schrauber


Joined: 04/12/2002
Posts: 1132
Karma: +3 / -0   Thank you, like it!
Location: Stuttgart

Support

Post13-01-2003, 21:59    Subject: Motor Target Values in Tables Quote

Hi Ulf,


That's fine. I've already started.
Tschüss

Michael II


Translated on 26-09-2026, 22:42.
Back to top Profile PM
edward
Guest




 


Free account, no CAN development support

Post14-01-2003, 0:07    Subject: Motor Target Values in Tables Quote

@MichaelII:
Thank you!
I would also like to contribute with constructive feedback, but unfortunately, I lack the necessary expertise.
But what isn't, doesn't exist...

Thank you on behalf of everyone to the people who enrich this community day and night :-)).


Translated on 26-09-2026, 22:42.
Back to top
dieselschrauber
Administrator
Administrator
Avatar-dieselschrauber

Joined: 04/12/2002
Posts: 18113
Karma: +800 / -0   Thank you, like it!
Location: St.Gallen
2018 Volkswagen T6 Consumption


Post14-01-2003, 11:49    Subject: Motor Target Values in Tables Quote

Hi Ulf,

Quote:
Copy the data from the error database and transfer it offline to an Excel spreadsheet or something similar
.
I think regular HTML tables would be better. Not everyone has Excel or a suitable spreadsheet program.
Furthermore, we shouldn't support Winzigweich any more... icon_cool.gif

Best regards, Rainer.


Translated on 26-09-2026, 22:43.
Back to top Profile PM WWW Garage
ulf
Profi-Schrauber
Profi-Schrauber


Joined: 04/13/2002
Posts: 11058
Karma: +18 / -0   Thank you, like it!
Location: Saarland
2023 MG ZS
Premium Support

Post14-01-2003, 21:03    Subject: Motor Target Values in Tables Quote

Rainer K. wrote:

I think regular HTML tables would be better.
Because not everyone has Excel or a suitable spreadsheet program. icon_exclaim.gif

Sure, the main thing is to keep it clear
Quote:
.

8)Furthermore, we shouldn't support Winzigweich any more...
icon_lol.gif

icon_lol.gif icon_lol.gif I didn't know that one for M$ yet icon_lol.gif }
Gruß Ulf
_________

MG4 Electric


Translated on 26-09-2026, 22:44.
Back to top Profile PM Garage
New Topic Reply 🔗 ⭐ 🖨 Dieselschrauber - Index » Diesel Engine Technology
Similar articles and topics
Topic Forum
No new posts Target values for 6-cylinder engines. VP AYM Technical Data
No new posts AJM Motor - Motor klappert, Leistungsmangel, Schwarzrauch Faults & Documentation (Audi, VW, Seat/Cupra, Skoda)
No new posts 2.0 TDI Engine Coolant Leak Faults & Documentation (Audi, VW, Seat/Cupra, Skoda)
No new posts T4 Engine MKB: Target Values & Specs Diesel Engine Technology
No new posts Sollwerte für PD ARL Diesel Engine Technology
No new posts ASZ Setpoints: Values and Configuration On-Board Diagnostics (OBD)
No new posts AU: Setting Abregel Thresholds - Explained Diesel Engine Technology
Jump to:  
You cannot post new topics in this forum.