VW Passat 3B6 2.0 TDI (BGW) measurement blocks

Hello,
"First, I apologize for writing in English - my knowledge of German is very poor (passing the anti-spam questions was really difficult )."

I am looking for standard values for engine measuring blocks. Engine code BGW, VW Passat Variant 2.0 TDI, 2004 with DPF. I suspect the PD injectors are failing (BIP values in the 023 range are up to 40).

Best regards,
ORMO

Standard values for the engine measurement module (MWB) 23 =
-100 to +100

Just check your VCDS label file...

Hi.
Sure, you're welcome.

Quote:

Just look in your VCDS label file...

I have VCDS versions 805.4-PL and 908-EN, and there is no label file available for this engine .

Quote:

Standard values for engine control unit (ECU) data block MWB 23 = -100 to +100

Well, in fact, I was looking for this block vals , thank you very much. Are you sure that the BIP (Bosch Injection Pump) has such a large range in this engine? As far as I know, for typical TDI-PD engines, it's usually around +/- 30.

[Edit Admin: I think there is absolutely no need to link to some file hosters as the attachment function in this forum is inteded for this purpose.Bitte gib mir den deutschen Text, den du übersetzt haben möchtest.


Best regards,
ORMO


Please provide the text you would like me to translate from German to English.
one more question.
004.4 = camshaft/crankshaft synchronization, similar to that found in the 1.9 TDI-PD engine?

ormowiec wrote:

Well, in fact, I was looking for this block vals , thank you very much. Are you sure that the BIP (Bosch Injection Pump) has such a large range in this engine? As far as I know, for typical TDI-PD engines, it's usually around +/- 30.

The name of the label file is 038-906-016-BGW.lbl, and it's located in the "labels" directory.
Yes, and I'm certain, from +100 to -100.

Okay, I'm sure there isn't a file with that name in my VCDS labels. There's nothing listed with "*BGW*".

Quote:

And yes,iam sure +100 to -100.

Thank you very much .