Ungewollte Vollbremsung durch ABS | Posts 48+

11-04-2006, 22:11 Subject:

Rainer K. wrote:

The hydraulic lines on the ABS valve block are mechanically incorrectly connected, meaning they are somehow reversed?

Greetings, Rainer

Yes, absolutely! Well, you never stop learning...

Guest Free account, no CAN development support

Well, who said that before?

11-04-2006, 22:28 Subject:

[Translating...]

grmpf

12-04-2006, 22:54 Subject:

@ChrisdaKing Viewing profile: ChrisdaKing

Well, you really messed with us, reading the nonsense you've written here.
Hopefully, you now understand how to properly install an ABS module, and that when using the "wheel free" function, the brake pedal should be pressed upwards instead of downwards.

13-04-2006, 8:28 Subject:

BM wrote:

@ChrisdaKing
Well, you really messed with us, if you read through the nonsense you've written here.

Great post, I'm impressed! ... I just assumed it was correctly connected because it was even rebuilt. Well, the thread can be closed

.