Part Number Original PD Fuel Injectors

It's probably time to replace the fuel injectors on my Fabia, but they need to be replaced with the original ones.

But somehow, only tuning nozzles are apparently offered, which I cannot accept because they are already almost at the maximum. Nm achieved and no further modifications to the control unit are intended.

Does anyone know the part number for the ATD nozzles, possibly for the successor AXR?
Unfortunately, it seems that most companies are primarily interested in selling complete injection molding components, ideally new, at the appropriate price.

How many kilometers have you driven? If there are no problems, I wouldn't do anything. You can already check certain things with VCDS. The biggest problem is the careful installation and removal of the PD elements. The possibility of cleaning the nozzles in the ultrasonic bath still exists.

Currently, I have already exceeded 240,000 km, and based on the increased average fuel consumption while maintaining the same distance and speed, I suspect that new injectors would improve fuel consumption and other parameters.

"Tuning nozzles are readily available everywhere, but since I don't want to make any major performance modifications, nozzles with the same specifications would be the best choice."

I was also considering having the cleaning done, but since the components were already out, it shouldn't be due to any new nozzles.

Quote:

Otherwise, if the components are already out, it shouldn't be due to a few new nozzles.

Don't be fooled! It seems like the PDE hasn't been decomposed yet

vwSchrauber wrote:

If the parts are already out, then it shouldn't be due to a few new nozzles. Quote: Don't be fooled! It seems like the PDE hasn't been decomposed yet

Tip: Get a used PD (Personal Data Protector) and practice with it while looking at the relevant articles.

dieselschrauber wrote:

Tip: Get a PD from a scrap yard, watch the video in the specialist articles and practice with it.

Danke, eigentlich keine schlechte Idee, da ich das letzte Mal vor genau 25 Jahren in meinem ehemaligen Beruf die Einspritzdüsen bei Motoren aufbereitet hatte, bei denen weder die Steuergeräte noch andere Sensoren oder Strom angeschlossen waren. It was all just mechanical...and it still worked at -50 degrees.

But unfortunately, I still don't have any suitable options.

Seat Valve Set Fabia (Original) ATD Bosch 1417010989
Seat Fabia (Original) AXR Bosch 1417010984
PDE gasket set Bosch 1417010997

Steffen W wrote:

Seat Hole Connector Kit Fabia (Original) ATD Bosch 1417010989 Seat Fabia (Original) AXR Bosch 1417010984 PDE Bosch gasket set 1417010997

Danke, das hilft mir ja mal schon weiter und wie vermutet, sind die Seriendüsen teurer, als die meisten angebotenen Tuningdüsen.

...and, of course, the cheap options are not necessarily the best