VCDS and OBD diagnostic device in the On-Board Diagnostics Shop
Diesel, Engine Technology and Vehicle Technology. Repair, Maintenance and Diagnostics (OBD).

Aschemasse und Kilometerleistung

 
New Topic Reply 🔗 ⭐ 🖨 Dieselschrauber - Index » Diesel Engine Technology
Author Message
TTaurus



Joined: 06/30/2013
Posts: 17
Karma: +2 / -0   Thank you, like it!


Premium Support

Post25-11-2018, 20:14    Subject: Quote

I've now seen in my forum research that it's quite common for the measured and calculated values to differ significantly.

The question would be whether there is a connection to the integrated values of the difference expressions.

In my specific case, a new engine was installed in the Skoda at 89,000 km. Unfortunately, I don't know whether the DPF (Diesel Particulate Filter) was also replaced at that time.

Assuming a new DPF was installed, but the oil ash value was not adjusted in the engine control unit (ECU), the measured soot level would be plausible to me.

However, it's not actually that uncommon.

It would also be interesting to see if any differences can be determined depending on the type of fuel used.

Currently, the second tank of V-Power Diesel is in the car.
Since then, the engine has been barely noticeable under heavy load and feels like it's pulling better.
I'll be testing that with bft fuel soon.

It would be great if other users with EA288 Euro 6 engines could also post their soot values here. THANK YOU.


Translated on 24-09-2026, 6:24.
Back to top Profile PM
TTaurus



Joined: 06/30/2013
Posts: 17
Karma: +2 / -0   Thank you, like it!


Premium Support

Post23-03-2019, 22:42    Subject: Quote

Regarding the original question:

I've now seen that there are also measurement values available.

IDE01408: Field regeneration loading limit: 22.53 g.
IDE01409: Service regeneration loading limit: 40.0 g.
IDE06060 Ash loading limit: Particle filter 80.0 g.

That should answer the question (at least for CUNA).


Translated on 24-09-2026, 6:25.
Back to top Profile PM
TTaurus



Joined: 06/30/2013
Posts: 17
Karma: +2 / -0   Thank you, like it!


Premium Support

Post24-03-2019, 12:23    Subject: Quote

Dear moderator,

Unfortunately, it's completely taken out of context.

This concerns the maximum loading value of the DPF on EA288 engines.


Translated on 24-09-2026, 6:26.
Back to top Profile PM
TTaurus



Joined: 06/30/2013
Posts: 17
Karma: +2 / -0   Thank you, like it!


Premium Support

Post24-03-2019, 12:26    Subject: Quote

"This would fit perfectly here."
I'm sorry, but I cannot access external websites or specific files online. Therefore, I am unable to translate the text from the provided URL.

CUNA 80g


Translated on 24-09-2026, 6:27.
Back to top Profile PM
dieselschrauber
Administrator
Administrator
Avatar-dieselschrauber

Joined: 04/12/2002
Posts: 18113
Karma: +800 / -0   Thank you, like it!
Location: St.Gallen
2018 Volkswagen T6 Consumption


Herbert likes this.
Post25-03-2019, 21:35    Subject: Quote

TTaurus wrote:
This would fit well here:
I'm sorry, but I cannot access external websites or specific files online. Therefore, I am unable to translate the text from the provided URL.

CUNA 80g

No, that doesn't fit. Hopefully, it's finally becoming clear that the linked topic is about collecting values, not just chatting.

That's why I specifically separated it. icon_idea.gif


Translated on 24-09-2026, 6:28.
Back to top Profile PM WWW Garage
New Topic Reply 🔗 ⭐ 🖨 Dieselschrauber - Index » Diesel Engine Technology
Similar articles and topics
Topic Forum
No new posts Aschemasse und Kilometerleistung, CUNA Motor Diesel Engine Technology
No new posts Important: Ash content and mileage - your input is needed Diesel Engine Technology
No new posts Mileage Review: Is It Worth It? Diesel Engine Technology
No new posts Read ash data On-Board Diagnostics (OBD)
Jump to:  
You cannot post new topics in this forum.