Author: Michael II
ABS-control light is on, rear sensor line is damaged.
Cause:
Undesirable tolerances in the connection of the sensor cable with the mounting bracket in the area of the rear left and right fender. In a worst-case scenario, damage to the sensor cable could occur.
Solution:
Please check the connection between the sensor cable and the mounting brackets for a secure fit. If the sensor cable can be easily loosened from the clamps, then tighten the clamps by at least 1 mm to a maximum of 2 mm.
_________________
Bye.
Michael
Translated on 03-07-2026, 15:19.
|