Kaltstartproblem-starker Rauch AFN | Posts 16+

'There are no scratches or damage. I've taken everything apart, and the pistons and bearing shells look good. You can still see the honing marks in the cylinder walls. The valves aren't bent or damaged anywhere. I'm going to put in two new connecting rods now; hopefully, that will fix it.'

If that's the case: Good luck, hopefully everything will work again.

Let the cat out! (or Let the cat run free!)

The oil has also leaked through the exhaust system. When it gets hot, it causes smoke!

Regards,

Manuel.

I immediately removed the cat when I installed the other turbo; it was completely blocked.