Adjust idle speed

Hello everyone,


I have a question: "How do I change the idle speed on my car using VAG-COM?"
Volkswagen Passat 3B5, V6 TDI 2.5 liter engine, AFB code, manufactured in October 1999.


I've already found something, but I'm not sure if it's the right thing.

Quote:

Select the engine control unit. Please log in to channels 1, 3, 4, and 5 using the username "12233". Select adaptation. Select the corresponding channel and change the value (which can only be changed within certain limits). Channel 1: Injection amount. Channel 2: Idle speed. Channel 3: Air mass. Channel 4: Injection timing. Channel 5: Starting amount.

With the "Adjust Channel 2" function (option 10), it should work if your control unit supports it.

It works with the 4-cylinder TDI engines, but only within a limited range.

"I've had an AFB (air flow balance) adjustment done, and I've also had an AKE (acceleration control enhancement), but as I said, only within a specific range, approximately plus or minus 50 RPM."

It is very rare that it's truly necessary to change the idle speed; usually, people only do it to hide problems that they can't solve any other way.

I'm afraid I have to agree with you, but I only did it for testing purposes.