Newer ESP generation console, but from the old block

As described in this article, it is possible to install newer ESP pumps by replacing the mounting bracket.

Okay, I'm ready. Please provide the German text you want me to translate.
t=2649&start=0&postdays=0&postorder=asc&highlight=esp%20ahh%20console

You only need to...
New console from AHH 028 130 147 M.
Pulley, new, part number 028 130 107D.
and the ESP.

'Now, it's hard to find a used AHH engine, so I'm wondering if there are other engine codes that have the newer generation of fuel injection pumps, and whether there's an old block or a bracket that fits the old blocks.'

Okay, here's the translation:

'This weekend, I replaced my water pump, and in the process, I had to remove the bracket that holds the alternator (LIMA) and the air conditioning unit. Now, the ESP (Electronic Stability Program) on the AFN engine has a single bracket for both of these components!'
At ASV and similar organizations (which have the PD block), the idea is to have only one mounting bracket for everything. Is that correct?

Has anyone already done this conversion? I can't get the person who wrote about it to respond! I need to see the photos that show the modifications I still need to make!

It would be great if someone could help me! If anyone has a similar holder, please offer it up. I would appreciate any tips and photos.
Best, Björn.

Hello,

Has a solution been found for your question? I'm actually experiencing the same problem...

Best regards, Gunnar.

Hi, I couldn't find any other consoles!
As a tip, check out some major online retailers!

Best regards, Björn.