VCDS and OBD diagnostic device in the On-Board Diagnostics Shop
Diesel, Engine Technology and Vehicle Technology. Repair, Maintenance and Diagnostics (OBD).

Boost Pressure Values: Explained & Measured

 
New Topic Reply 🔗 🖨 Dieselschrauber - Index » Diesel Engine Technology
Author Message
atzleh
Guest




 


Free account, no CAN development support

Post08-03-2003, 16:36    Subject: Boost Pressure Values: Explained & Measured Quote

Hi everyone! I have an AFN A4 with 251,000 km. Up to 3000 rpm, it runs smoothly (around 0.9 bar of boost). Between 3000-4000 rpm, it feels sluggish (boost pressure is 0.4-0.5 bar), and at 4100 rpm, that's the limit (full throttle). I notice it smokes quite a bit when I accelerate. Are these boost pressure values normal?
Regards, Holger


Translated on 24-08-2026, 8:16.
Back to top
Michael II
Profi-Schrauber
Profi-Schrauber


Joined: 04/12/2002
Posts: 1132
Karma: +3 / -0   Thank you, like it!
Location: Stuttgart

Support

Post08-03-2003, 18:45    Subject: Boost Pressure Values: Explained & Measured Quote

Please compare the target values with the table provided in the "Troubleshooting and Instructions" section.
Tschüss

Michael II


Translated on 24-08-2026, 8:17.
Back to top Profile PM
New Topic Reply 🔗 🖨 Dieselschrauber - Index » Diesel Engine Technology
Jump to:  
You cannot post new topics in this forum.