Hi,
Quote: |
| Since he continued driving, the primary question is whether the seals and rings survived without oil lubrication? |
A potential issue could be the turbocharger's bearing lubrication, especially if it has been operated for a period without oil pressure. However, it can be easily checked by removing the intake snorkel.
As for the rest, things might have been okay as long as some oil was still trickling out of the pump and the engine load wasn't too high. It really depends on how long it was driven like that.
My BRE (presumably a vehicle or engine) didn't suffer any oil-related damage, and the engine ran without the oil pump for a short period, with breaks, and under minimal load, totaling perhaps ~2 minutes.
Best regards, Rainer.