Alarm triggered by backup horn (alarm siren).
In the fault memory, there is no entry, but the backup horn is listed as the source of the alarm.
Up to chassis number: 1T 4W 101 000
Cause:
Voltage spikes in the power distribution network, caused by activity on the data bus, can trigger the alarm.
Solution:
Control units with part numbers 1K0 959 433 C and 1K0 959 433 T, without FKZ (software specification), must be replaced.
With the new control unit, part number 1K0 959 433 T 01, the problem of the alarm being triggered is resolved.
Bitte die alte Codierung übernehmen. Additionally, the following must be added to the encoding:
Self-diagnosis / 46 - Comfort System / Long Coding read/write Byte 0 Bit 7 to 1 set e.g. 1xxxxxxx
Self-diagnosis / 46 - Comfort System / Long Coding read/write Byte 12 Bit 0 to 1 set e.g. xxxxxxx1
Self-diagnosis / 46 - Comfort System / Adjustment / Channel 19 - Factory Mode: On to Off. Tschüss
Michael II |