Measure Boost Pressure with VAG-Com

Hi.

Does anyone have instructions on how to measure and log boost pressure using VAG-Com?
And what the test drive is likely to be like.

panther

http://www.dieselschrauber.de/Solldaten_Main.html
Acceleration test: accelerate from approximately 1200 to 4500 rpm in the highest possible gear, using full throttle.

Good evening.

I was able to measure my boost pressure today.
We also logged some data, but I can't quite make sense of it. Also, the table seems to be a bit jumbled when I open it with Excel.

I hope someone can help me.
I've uploaded the logs.

http://home.arcor.de/planetpanther/diagnose/log-01-002-010-007.csv
http://home.arcor.de/planetpanther/diagnose/log-01-004-010-011.csv

panther

hi,

I once converted your CSV file to XLS. In Excel, you need to go to "Data" / "Get External Data" / "From Text" and import the file. When doing so, use a comma as the column delimiter and a period as the decimal separator (using the "More..." button in step 3). This should give you a correctly formatted file.

Someone else needs to interpret it; I can only read it.

Peter K.

-> An Excel file was sent via private message.