1Z NHG: Numbering Errors in German Inheritance Law

Hi.

What do you think the nozzle with the needle movement sensor is called in the 1Z?

I was thinking of the license plate 028 130 201 JX.

But just now I read something about 028 130 201 GX.

What do you say?

Do the electrical connectors of the ASV nozzles fit the 1Z engine?

m;

Hi Martin!

If I remember correctly:
028 130 201 H is for 1Z in Audi 80/A4/A6.
028 130 201 J is responsible for the remaining 1Z.

Source: http://www.bosch-automotive.com/ecat-online

I suspect the cable length or the connector might be different. If you can post the length and a picture of the connector, I can compare it to my 028 130 201 H.

028 130 201 G or GX.

Installed in the Audi 80/90 and Cabrio models of the A4 and A6, in the Caddy and Golf (Cabrio, Ecomatik) models, in the Passat, Sharan, and Bora.

The 028 130 201 G or GX is not an NHG injector , but a standard one.

028 130 201 JX = NHG injector (194€). Suitable for engine codes 1Z in vehicles with AHU and AFF engines.

I messed something up!

The question is, H and J.

I only have J-type nozzles for my NBF system, but I've now been offered H-type nozzles.

The ecat also says J.

Sorry, could you please answer again ?

"Thank you."
m,

Of course, we can answer .

The H or HX (exchange unit, €194) was used in the Audi 80/90 and Cabrio models. The engine code for this is 1Z. Therefore, it should fit. It was installed from chassis number 8C-P-059 001 onwards. Before that, the part number was 028 130 201 AX (€185) up to chassis number 8C-P-059 000.

Have fun with the new nozzle .

I completely messed it up exactly like that .
But what I wrote above is still correct (with the corrected part number)!