VAG-COM: Strange Values on Audi A4 (1995)

Hello,

I'm having a problem reading and logging data from the mass airflow sensor (MAF) in a 1995 Audi A4 1.8L ADR.
If a measurement value (MWB) is labeled with "speed," for example, it is possible that the value is given in g/s and does not correspond to the actual speed . In another MWB, the mass flow rate (LMM) might be indicated with "ms," etc.

Is VAG-COM too new for this vehicle, or is the vehicle too old for VAG-COM? Or do I have a problem with the software or hardware, or is the issue related to the vehicle's control unit?

Thank you for your help.

Regards,
Sebastian.

Hi Sebastian,

Could you please provide the complete VAG part number of your control unit?
Reason: Using the VAG part number, VAG-COM searches for a suitable label file for your control unit. This file, among other things, defines the names of the fields in the measurement blocks (it is a text file).
If a label file is not found, VAG-COM attempts to guess the type of the values, which can of course lead to errors.

Best regards, Rainer.

Hi Rainer,

I don't have the number readily available ; I'll have to check again after work.
Denke mit der Fahrgestellnummer kannst Du nichts Anfangen?! I would have...

Regards,
Sebastian.

Hi,

No, the chassis number doesn't help . The VAG part number of the respective control unit is displayed directly in the first screen on the left side in VAG-COM when you access the control unit.

Best regards, Rainer.

Hello Rainer,

Okay, I now have the number of the control unit.

8D0 907 557 CX

Regards,
Sebastian.

Hi,

is the content of.
[Edit]
dead link
[Edit]
plausible?
If yes, save the file as 8D0-907-557-CX.lbl in the 'Label' directory.

Best regards, Rainer.

Hello Rainer,

Thank you for the link!

It's good that we'll have the weekend soon, then I can check that.

Regards,
Sebastian.

You can also try searching on Google (e.g., next week).
Search for 8D0-907-557-ADR.lbl

Rainer K. wrote:

http://www.ross-tech.com/vag-com/download/label-files/8D0-907-557-C.lbl

Am I too stupid, or is the link not working?!

Rainer K. wrote:

You can also try searching on Google (e.g., next week) for... Search for 8D0-907-557-ADR.lbl

Currently, no results, but why then next week?!

Besswerwisser wrote:

Rainer K. wrote: http://www.ross-tech.com/vag-com/download/label-files/8D0-907-557-C.lbl Am I too stupid, or is the link not working?! Rainer K. wrote: You can also try searching on Google (e.g., next week) for... Search for 8D0-907-557-ADR.lbl Currently, no results, but why then next week?!

Hi Sebastian S.,

You don't need to post anonymously to draw attention to files that were requested and created on August 3, 2005. Especially if you consider time zones...



Okay: Sebastian S. has updated the link at Ross-Tech and added some files.
http://www.ross-tech.com/vag-com/download/label-files/8D0-907-557-ADR.lbl
Either save the file using your VAG part number, or copy the entire directory to your label directory (make sure to back up and empty the directory first).
Since the .zip file is from April, the easiest way is to use 'wget' or a similar tool.

Best regards, Rainer.

http://www.ross-tech.com/vag-com/download/label-files/8D-01.lbl

...then, if appropriate, one should also suggest that he use the corresponding redirect...

...then he can save himself the trouble of renaming it... (provided that VAG-COM 405.0 or higher is available).

Rainer K. wrote:

You don't have to post anonymously...

I don't think I was wanted in a different way... but we can talk about that privately, or not at all...

Besswerwisser wrote:

http://www.ross-tech.com/vag-com/download/label-files/8D-01.lbl ...then, if appropriate, one should also suggest that he use the corresponding redirect. ...then he can save himself the trouble of renaming it... (provided VAG-COM 405.0 or higher is available).

Yes, but then he should update everything, so the entire label directory. It's just more work, and eventually, there will be another update from me where I'll repackage the installation.

Best regards, Rainer.

That's right. For simplicity's sake... fresh and new.

http://www.Ross-Tech.com/vag-com/download/label-files/Labels.50805.zip

Besswerwisser wrote:

That's right. Then, for simplicity's sake... fresh and new. http://www.Ross-Tech.com/vag-com/download/label-files/Labels.50805.zip

Thank you, that saves time.

Hello,

It's nice that you're so concerned about my label files!

I now have the link. Do I need to save the old labels, delete them, and then save the new ones?

By the way, I have VAG-COM 504.1, so it shouldn't cause any problems!

Thank you for your efforts .

Regards,
Sebastian.

Hi,

There are several ways to handle this, but the simplest would probably be to rename the existing label directory and use the zip file as the new 'label' directory.

Best regards, Rainer.