Oil Service Data: Read Measurement Values

Hello!!

My brother has a Polo, model year 09/2004, chassis code 9N1. Can anyone tell me how to read the information about when the next oil change is due using VAG-COM?


For my Audi, I only need to press the left button in the Combi display. Unfortunately, his Polo doesn't have that button .

Thank you in advance for your help.

Just take the right button .
Turn on the ignition, press the button for 3 seconds, and be amazed .

ok!! thank you!!

and can this whole thing also be read out with VAG-COM?

Best regards,

It should be stored in the highest measurement value blocks within the engine control unit, but sometimes there are gaps before the relevant blocks.

Roger wrote:

It should be stored in the highest measurement value blocks within the engine control unit, but sometimes there are gaps before the interesting blocks.

It definitely wouldn't be in the engine control unit, as that has nothing to do with the service interval data.

The keyword is "instrument cluster".

Code:

005,0,Serviceinformationen 005,1,Serviceüber-,schreitung,Strecke 005,2,Serviceüber-,schreitung,Zeit 005,3,Restlaufstrecke 005,4,Restlaufzeit ; 006,0,Serviceinformationen (Öl) [WI = Wartungsintervall] 006,1,Min. Ölstands-,abweichung 006,2,Max. Ölstands-,abweichung 006,3,Langzeit,Mittelwert,Ölstandsdifferenz über die letzten 100 km 006,4,Motorhauben-,kontakt,Wertebereich: Auf = Motorhaube geschlossen / Zu = Motorhaube geöffnet ; 007,1,Aktueller,Ölstand [mm],vom TOG-Sensor

Quote:

The keyword is combination instrument...

Ouch, you're right .

ok, thanks!!

Okay, then address word 17 --> for combination.

then code 005, 006, etc...

I will definitely test it out tomorrow .

No code.

VAG-COM > Select Control Unit > 17 - Instrument Cluster > 08 - Measuring Blocks.

You can then select the measurement groups.

Reading the manual should become mandatory.