VCDS and OBD diagnostic device in the On-Board Diagnostics Shop
Diesel technology, engine technology, vehicle diagnostics, repair & maintenance.

Is the T4 ACV ESP 074130107N the same as the 074130115B, except for the connector?

 
New Topic Reply 🔗 🖨 Dieselschrauber - Index » Diesel Engine Technology
Author Message
Klausen
Blaumann
Blaumann


Joined: 06/16/2004
Posts: 46
Karma: +6 / -0   Thank you, like it!


Free account, no CAN development support

Post25-11-2005, 13:05    Subject: Is the T4 ACV ESP 074130107N the same as the 074130115B, except for the connector? Quote

I just found this product description on IIIbäääh.

Quote:
Is the fuel injection pump of your beloved T4 bus broken? And did you buy the wrong one,
IIIbäääh, because of an incorrect or insufficient description? Here is a solution.

"I'm offering an adapter that can be used, for example, to connect a fuel injection pump from a..."

It is possible to install a 2.5L TDI engine from a T4 model year 1996 into a T4 model year 2003.

Since the pumps have the same design but only different connector types,
Is this possible?
The older TDI generation has a 3-pin connector and an 8-pin connector, but only...

7 pins are used, while the newer generation has a 10-pin connector.

Of course, I also offer adapters that work in the opposite direction, meaning you can install a new 10-pin pump in an older TDI engine.

Adapters are also available for AAT and AEL engines from Audi A6 models that have a round connector. Since the pumps from the A6 have the same design, it is possible to install them in a T4 and provide them with power.

The same applies to the new generation of the 2.5L TDI engine, which has the same fuel injection pump as the T4.

Here is a brief excerpt of the MKB models for which this adapter is compatible (or the reverse configuration):

- BBE

- BBE

- ANJ

- ACV

- ON

- AYY

- AJT

- AYC

- APA

- AGX

- AHD

This is not a commercial auction. Therefore, a guarantee is not assumed.

He wants to sell that adapter to someone.
However, the pumps from ACVs manufactured from 1998 onwards are compatible with those from 1996-1997.
I'm new to using "&" and its functions.
And the fact that the pumps from the A6 fit on the T4 is just amazing.
I used to have a 115B (with one connector), but I needed a 107N (with two connectors).
Unfortunately, I haven't tried it to see if it works.
My local Bosch dealer also told me that it doesn't work.
Since everything here is different (i.e., the quantity and the high-pressure component).
Or did he completely lie to me?
But I'm actually thinking more about a complete and utter scam involving an auction house.
Please explain it to me.

Best regards,


Translated on 03-07-2026, 15:19.
Back to top Profile PM
New Topic Reply 🔗 🖨 Dieselschrauber - Index » Diesel Engine Technology
Similar articles and topics
Topic Forum
No new posts Document: Engine starts, then immediately stalls. Model: ... Faults & Documentation (Audi, VW, Seat/Cupra, Skoda)
No new posts Neu und gleich ein Problem On-Board Diagnostics (OBD)
No new posts Einspritzdüse Sdi und Tdi gleich? Diesel Engine Technology
No new posts Steuergerät gleich? On-Board Diagnostics (OBD)
No new posts Wasserpumpe gleich mitwechseln? Diesel Engine Technology
Jump to:  
You cannot post new topics in this forum.