Adjusting the {ELECTRO_SERVO} in the 3C/1K setup?

Hello,

Can the electromechanical servo be adjusted in the 3C/1K to provide more assistance?

In the labels, I didn't find anything.
My new steering column STG and the associated steering angle learning and servo end stop learning make my car's steering feel stiffer. And as a city sphere, it should be a bit more impersonal

m;

Golf:

Quote:

Address 44: Steering Aid Label file: RKS\1Kx-909-14x.lbl Part Number: 1K1 909 144 M Part: EPS_ZFLS Class.069 H08 1901 Operating Number: WSC 39799 133 89844

Passat:

Quote:

Address 44: Steering Aid Label file: RKS\1Kx-909-14x.lbl Part Number: 1K1 909 144 L Part: EPS_ZFLS Class 136 H07 1806 Operating Number: WSC 02069 000 90108

Maybe the wrong suspension type or spring range was chosen?

http://de.openobd.org/vw/golf_1k.htm#44

Oho... The Passat is allegedly "learning-worthy" in aspects that are not mentioned in the Golf.
For the Passat, no PR adjustments are needed.

If the Golf also has learning values, and the G85 and end position have been forgotten, then this is probably already an explanation for the different feeling when steering.

m;

Hm ... Does the Passat have a different steering gear? So, mehr oder weniger, von Anschlag bis Anschlag?

I need to check that first...

The golf cannot be adjusted to channel 01.
There are only 2, 3, and 4.

m;

Okay

Adapting is not.
But they are adapted - see MWB 008

Golf Characteristics Index 69 Normal 3
Passat, Characteristic Index 136, Normal 6

m;

EDIT:
I just noticed that the characteristics are not listed in MWB 008, but actually in the part identification:

Part: EPS_ZFLS Class.069 H08 1901

Part: EPS_ZFLS Class 136 H07 1806