P2187 - Bank 1, System Too Lean (Idle) (Solution)

Author

Message

dieselschrauber
Administrator

Joined: 04/12/2002
Posts: 18113
Karma: +800 / -0

Location: St.Gallen
2018 Volkswagen T6 Consumption

02-02-2016, 11:57 Subject: P2187 - Bank 1, System Too Lean (Idle)	Quote

P2187, Bank 1, system too lean (idle), possible causes: - Fuel injectors are clogged or stuck. - Air leak in the intake system after the mass airflow sensor. - Leak in the exhaust system. - The mass airflow sensor (G70) is giving incorrect readings. - The fuel pump is not providing enough pressure. - Malfunction in the fuel vapor system (check component N80). Dipl.-Ing. (FH) Rainer Kaufmann - Original VCDS mit KPower, KDataScope und Dieselschrauber Support Translated on 03-07-2026, 15:19.

Ratings - P2187 - Bank 1, System Too Lean (Idle)

Average rating: 0.00 - worst rating: 0 - best rating: 0 - number of ratings: 0 - View ratings

You are not authorized to rate this topic. Danke sagen

Topic		Forum
Similar articles and topics
	Error code P2177 - Lean condition system during idle	Faults & Documentation (Audi, VW, Seat/Cupra, Skoda)
	Error code P2178 - Engine running too lean	Faults & Documentation (Audi, VW, Seat/Cupra, Skoda)
	P0171 Fuel System Bank 1 Lean Mixture	Faults & Documentation (Audi, VW, Seat/Cupra, Skoda)
	Misfires on entire cylinder bank in ASN (A6 3.0)	Gasoline Engine Technology
	P0171 Fuel Trim Lean - A4 Diagnosis	Gasoline Engine Technology
	Tried the PD-Powerbox -> performance gain is quite min...	Diesel Engine Technology
	TDI Tuning: System Optimization & Performance	Diesel Engine Technology

You cannot post new topics in this forum.