Bordnetz Golf VII

Joined: 12/15/2016 Posts: 5 Karma: +0 / -0 Premium Support

Hello,

I'm new to this forum and I have a question right away. I have a Golf VII that I've converted from standard headlights to xenon, and now I want to code the car's electrical system. However, I'm getting the message "no documentation available". Can someone help me? Which bits do I need to code? Thanks.

15-12-2016, 17:14 Subject: Bordnetz Golf VII

Hi,

no. Where is your car scan, and where can I see what's installed and how it's been coded?

Best regards, Rainer

Joined: 12/15/2016 Posts: 5 Karma: +0 / -0 Premium Support

Oh, sorry, I'll be sure to pay attention next time. Here is the car scan.

Joined: 12/15/2016 Posts: 5 Karma: +0 / -0 Premium Support

Please disregard any errors, the entire vehicle is disassembled. I would also like to have the multifunction steering wheel coded, and I would be grateful for any assistance.

15-12-2016, 22:24 Subject: Bordnetz Golf VII

Unfortunately, there is no label file available for your onboard control unit yet... please wait. I will pass on the information.

Best regards, Rainer

Joined: 12/15/2016 Posts: 5 Karma: +0 / -0 Premium Support

Hello,

ok, danke. How long could it take approximately?

Best regards, Roy

16-12-2016, 12:05 Subject: Re: Golf VII Wiring

Hifigarage wrote:

Hello,

ok, danke. How long could it take approximately?

Best regards, Roy

No idea

Have you already searched online for auto-scans with identical control units and Xenon headlights?

In such cases, please do not blindly copy everything, but find out which bits/bytes cause the lamp error messages to disappear, as the rest of the vehicle environment is usually also hardly identical.

Best regards, Rainer

16-12-2016, 15:40 Subject: Bordnetz Golf VII

Hi,

According to Ross-Tech, VCDS 16.8.4 in English already has a corresponding label file, please test the long coding assistant with the English VCDS version.

Best regards, Rainer

Joined: 12/15/2016 Posts: 5 Karma: +0 / -0 Premium Support

Hello, thank you for the tip, I tried it but unfortunately the same thing happened, too bad.

Best regards, Roy

20-12-2016, 20:47 Subject: Bordnetz Golf VII

Please use the English version for Autoscan...

Best regards, Rainer