Passat 3B AHU springt nicht mehr an | Posts 16+

Hi,
I only have the data from the 1Z model, but it should actually be compatible with the AHU.
- Axial play of the intermediate shaft: 0.25 mm;
- Tighten the central bolt to 90 Nm + 90°.
To provide counter-pressure, I'm mounting a long, flat piece of metal onto the front gear (using screws in the threaded holes for the vibration damper).
Okay, I understand. Please provide the German text you would like me to translate into English. I will only provide the translation.
Herbert.