syncro peter wrote: |
| The curves are clean, the torque and power are good, however, it has 15 kW less than it should (it currently has 87). The diagnosis is that the boost pressure is always lagging between 0.3 and 0.4 bar, but eventually reaches its target value, |
Hi Peter,
"It could also be caused by a blocked exhaust: above the turbocharger, "not enough pressure is dropping," which means there's insufficient drive energy, resulting in a corresponding drop in boost pressure, leading to a "double" power loss."
1. due to insufficient boost pressure.
2. due to excessive back pressure in the exhaust system.
"However, I don't think you can directly explain the excessive soot with that

. . . but you could always attribute it to the tuning

."