WFS Activation

WFS for Seat Toledo 1.9TDI Engine: AHF, Year: 8/1999

WFS cannot be programmed! The WFS is integrated into the dashboard.

Here's what I've tried: 17 Combination instrument - 11 Login with the number 0453 does not work! Am I doing something wrong?

The transponder identification number is SEZZZ0X0095975, the login should be 0453, but I'm not sure if this login number is correct *thinking*.

I got the keys from the Seat dealer using the VIN, as the two keys were lost.

Friendly wants 60€ for reprogramming:? However, I would have to first load and transport the entire car on a trailer, which is too complicated for me.

Unfortunately, I can't find any instructions on reprogramming the WFS in a Seat Toledo.

Good morning, where did you get the PIN? As far as I know, THESE are online and no longer have access to the PIN themselves. This would mean a visit THERE is unavoidable. Also, the PIN is only valid for one day. Best regards.

This is a WFS of the second generation, why should PIN 1 be valid? I can understand why it would be in the latest WFS! Login is not PIN.

Good morning, where did you get the PIN? As far as I know, THESE are online and no longer have access to the PIN themselves. This would mean a visit THERE is unavoidable. Also, the PIN is only valid for one day. Best regards

There seems to be something wrong with what you're saying. The fax retrieval for the login code is still possible. It comes as a 7-digit code and is entered with WSC and importer number, or it can be converted to a 4-digit code. The 7-digit code is actually only valid on the day of retrieval, but it works with Vag-Com every time by specifying the day. :wink:

@ T3 Surfer, what does the speedometer say when the login is entered? Does it show any lockout times?

Mullemaus:

The flashing indicator and key symbol are blinking! When I enter the login using VAG tester 1551, it returns an error. I can only access it again when I turn the ignition off and on, but even then, I have to start over. The request for the transponder code identification from Seat is 4 digits! There is an error in MSTG: STG is locked, WFS: Wrong key.

Hi,

dann passt der Login nicht. Please send the data or a scan of the fax via private message or email. Where are you coming from?

Hey, you have mail

It seems I made a mistake. The problem was that I used the wrong login and didn't realize that a 0 had to be added before the login number.

Thank you very much to Mullemaus