| Author |
Message |
robidobi007 Blaumann

Joined: 10/13/2007 Posts: 30 Karma: +2 / -0 Location: Fürstenberg/Havel
Free account, no CAN development support
|
13-10-2007, 12:07 Subject: Very strong soot development in upper part - full load |
Quote |
|
hello, I'm new here.
I have a problem. My 1.9 TDI has been producing a lot of smoke, especially in the upper and full load ranges, since I bought it.
VAG-COM available, logs can be created, but I don't know which one to choose.
LMM seems to be functioning correctly initially, as the performance is satisfactory.
As far as I know, the pressure was also okay at the time... it was around 0.7-0.8 bar max... so above atmospheric pressure. However, I will check again.
I have already shut down the AGR, removed the vacuum hose and sealed it. Of course, it could be that something is still stuck and causing it to return?!... But I don't want to remove it yet. I want to do a diagnosis with VAG-COM first.
MKB AJM
Best regards Bora Variant 1.9 TDI PD 115PS 310Nm @ 1900 1/min
Translated on 03-07-2026, 15:19.
|
|
| Back to top |
Profile PM Email |
 |
guste100 Profi-Schrauber


Joined: 07/27/2004 Posts: 2399 Karma: +435 / -0 Location: Mitte Schleswig Holsteins 2007 Volkswagen Passat Premium Support
|
13-10-2007, 13:19 Subject: Very strong soot development in upper part - full load |
Quote |
|
Check out the technical articles on systematic troubleshooting with VAG-COM. Then create the logs listed there, and present them in the appropriate format here, and you will certainly be able to help me without much speculation.
Don't forget the additional vehicle specifications including chip/box specifications.
Everything else would be gazing into the crystal ball.
Greetings
Good
Translated on 03-07-2026, 15:19.
|
|
| Back to top |
Profile PM Garage |
 |
teileklaus Schrauber


Joined: 12/30/2006 Posts: 2643 Karma: +12 / -0 Location: Obrigheim 2005 Volkswagen Premium Support
|
13-10-2007, 20:01 Subject: Very strong soot development in upper part - full load |
Quote |
|
guste100 wrote: |
Hello, Good | = Good Guste  Gruß, der Teileklaus
Touran 2017 DFG SCR 2,0, 150 PS Schalt
Fiat 500, Einkaufswagen
R1240R BIG Bore Tuningkuh, 142 NM
Translated on 03-07-2026, 15:19.
|
|
| Back to top |
Profile PM Email Garage |
 |
dieselschrauber Administrator


Joined: 04/12/2002 Posts: 18003 Karma: +784 / -0 Location: St.Gallen 2018 Volkswagen T6 
|
13-10-2007, 20:03 Subject: Very strong soot development in upper part - full load |
Quote |
|
...and Quote: | | the pressure should ideally be between 0.7-0.8 bar max | , which is far too low for the AJM. Measurement block 11 indicates the target value and the actual value.
Hello, Rainer
Translated on 03-07-2026, 15:19.
|
|
| Back to top |
Profile PM WWW Garage |
 |
robidobi007 Blaumann

Joined: 10/13/2007 Posts: 30 Karma: +2 / -0 Location: Fürstenberg/Havel
Free account, no CAN development support
|
13-10-2007, 21:36 Subject: Very strong soot development in upper part - full load |
Quote |
|
@guste
sorry, maybe I'm just not smart enough, but I can't find one, or a suitable one. I've already found the technical articles, but nothing that could help me.
I would like to log everything we need tomorrow... but which measurement blocks should I use?
Best regards Bora Variant 1.9 TDI PD 115PS 310Nm @ 1900 1/min
Translated on 03-07-2026, 15:19.
|
|
| Back to top |
Profile PM Email |
 |
vagtuning Guest
Free account, no CAN development support
|
13-10-2007, 21:38 Subject: Very strong soot development in upper part - full load |
Translating... |
|
[Translating...]/viewtopic.php?t=3322 |
|
| Back to top |
|
 |
robidobi007 Blaumann

Joined: 10/13/2007 Posts: 30 Karma: +2 / -0 Location: Fürstenberg/Havel
Free account, no CAN development support
|
13-10-2007, 22:39 Subject: Very strong soot development in upper part - full load |
Quote |
|
thanks for your quick help @vagtuning
Wie heißt es so schön??? Wer lesen kann, ist klar im Vorteil... Ich hatte diesen Thread schon offen, aber habe am Anfang darüber gelesen und nur die Symptome beachtet... Naja, ich werde bestimmt noch irgendwann  Bora Variant 1.9 TDI PD 115PS 310Nm @ 1900 1/min
Translated on 03-07-2026, 15:19.
|
|
| Back to top |
Profile PM Email |
 |
robidobi007 Blaumann

Joined: 10/13/2007 Posts: 30 Karma: +2 / -0 Location: Fürstenberg/Havel
Free account, no CAN development support
|
14-10-2007, 9:49 Subject: Very strong soot development in upper part - full load |
Quote |
|
Hello, I have created the logs, which can be found at the following link.
/viewtopic.php?t=17004
I also performed an acceleration measurement.
-straight stretch of several kilometers
-No curves, mountains, or anything like that
-at 3rd gear, around 1200 1/min, log with MWB 5 and 6, full gas up to around 5000 1/min
-then engage the clutch and let it roll out to around 70.
Type Bora Variant 1.9 TDI Highline
-115 hp
-310 Nm
Vehicle weight: 1450 kg
Fuel with 15 kg
Rider weight: 70 kg
other with 20
Temp 1 grad
dabei gam follgendes raus
/download.php?id=2505Bora Variant 1.9 TDI PD 115PS 310Nm @ 1900 1/min
Translated on 03-07-2026, 15:19.
|
|
| Back to top |
Profile PM Email |
 |
|