Audi A6 2.5 TDI, Preheat lamp flashing (AAT)

Hello,

I am Daniel, and unfortunately, I have a problem with my Audi. First, let's get the background information:

I recently acquired the Audi, with only 335,000 km on the odometer, from a reputable street dealer (you won't find cars like this at other export dealerships). And that's when the problems started. The car was a bargain so far, the only thing was that it idled loudly, I used the search function on this forum and found helpful information.
I cleaned and partially re-sealed the VP37 after getting a tip from this forum, and the sawing noise is gone. However, the indicator light has been blinking since then??

Initially, I monitored the settings using VAG-Com.

Fault memory displays the following message:

Code:

Part number: 4A0 907 401 F Part and/or Version: 2.5l R5/2VT EDC AT D22 Encoding: 00000 Workshop Code: WSC 00000 1 Error found: 00765 - Actuator for Valve Actuation Path (G149) 27-10 - Unlikely Signal - Sporadically Also, I also made a LOG: Friday, 09, October, 2009, 18:23:06 4A0 907 401 F ,,2.5l R5/2VT EDC AT D22, ,Group A:,'000,,,,,,,,,,Group B:,, Not Running,Group C:,, Not Running ,,,,,,,,,,,,,,,,,,,,, ,TIME,,,,,,,,,,,TIME,,,,,TIME,,,, MARKER,STAMP,,,,,,,,,,,STAMP,,,,,STAMP,,,, ,0.00,034,057,000,013,087,235,084,167,143,121,,,,,,,,,, ,0.38,033,056,000,016,087,235,084,167,143,120,,,,,,,,,, ,0.78,034,055,000,013,086,235,084,167,143,121,,,,,,,,,, ,1.22,033,057,000,015,087,235,084,167,143,120,,,,,,,,,, ,1.66,034,056,000,014,086,235,084,167,143,121,,,,,,,,,, ,2.11,033,053,000,015,087,235,084,167,143,119,,,,,,,,,, ,2.58,033,058,000,015,087,235,084,167,143,119,,,,,,,,,, ,3.04,034,055,000,013,087,235,084,167,143,122,,,,,,,,,, ,3.50,033,054,000,015,087,235,083,167,143,121,,,,,,,,,, ,3.95,034,055,000,013,086,235,083,167,143,121,,,,,,,,,, ,4.42,033,055,000,015,087,235,084,167,143,119,,,,,,,,,, ,4.86,034,056,000,013,087,235,083,167,143,121,,,,,,,,,, ,5.29,033,055,000,016,087,235,084,167,143,122,,,,,,,,,, ,5.68,035,055,000,011,087,235,083,167,143,121,,,,,,,,,, ,6.08,032,057,000,017,087,235,083,167,143,121,,,,,,,,,, ,6.49,035,055,000,010,086,235,083,167,143,123,,,,,,,,,, ,6.94,033,057,000,015,087,235,083,167,143,119,,,,,,,,,, ,7.39,033,055,000,014,087,235,083,167,143,119,,,,,,,,,, ,7.84,033,057,000,014,087,235,083,167,143,120,,,,,,,,,, ,8.30,033,058,000,015,087,235,083,167,143,120,,,,,,,,,, ,8.77,034,058,000,012,087,235,083,167,143,123,,,,,,,,,, 1.  23.033.059,000.015.087.235.083.167.143.120,,,,,,,,,, ,9.71,033,055,000,014,087,235,083,167,143,122,,,,,,,, ,10.17,033,059,000,015,087,235,083,167,143,119,,,,,,,,,, ,10.62,033,056,000,014,087,235,083,167,143,120,,,,,,,,,, ,11.05,034,058,000,014,086,235,083,167,143,123,,,,,,,,,, ,11.50,033,057,000,014,087,235,083,167,143,124,,,,,,,,,, ,11.90,033,058,000,016,087,235,083,167,143,117,,,,,,,,,, ,12.30,035,059,000,012,087,235,083,167,143,124,,,,,,,,,,

Based on the values I can assess, they seem to be within the acceptable range, except possibly for the injection start timing, which is quite high, but still within the specified limits.

If I then increase the injection amount, or the value, the light no longer flashes, however, I experience a noticeable loss of power and extremely high fuel consumption (7.5 to 11.5), furthermore, the engine starts poorly and also responds poorly to acceleration.

I hope I haven't forgotten anything and that the text above will help with the diagnosis.

Thank you in advance.