golf-vw wrote: |
We now have a Phaeton here at the university. Does it already have two K-lines?
I assembled the adapter with two K-lines and it works well with one. Now, I have a question about the other K-line. |
Hi.
Connect the Phaeton now... if you've built my adapter suggestion 4.0
and the Phaeton has 2 K-lines.
(If such an electronic control unit can still manage with just 1 K-line - which car would then need 2

?)
Then, depending on the specific control unit (STG), either the one or the other RXD LED should blink.
If that's the case, you know that...
- The Phaeton 2 K-Lines has...
- the separated RXD LEDs are functioning as intended.
Due to the latter, I would naturally be interested in the result

.
P.S.: "Normal" engine displacement can also be replaced by a TDI

.