VCDS and OBD diagnostic device in the On-Board Diagnostics Shop
Diesel, Engine Technology and Vehicle Technology. Repair, Maintenance and Diagnostics (OBD).

Engine control unit cannot be coded for manual transmission

 
New Topic Reply 🔗 ⭐ 🖨 Dieselschrauber - Index » On-Board Diagnostics (OBD)
Author Message
Dracula



Joined: 03/31/2018
Posts: 12
Karma: +5 / -0   Thank you, like it!


Premium Support

Post04-06-2021, 20:10    Subject: Engine control unit cannot be coded for manual transmission Quote

The engine control unit (ECU) EDC17C46 (03L 906 018 RG), with engine code CFGC, cannot be re-programmed from DSG (dual-clutch transmission) to manual transmission. While I can select the manual transmission option in the coding assistant, I receive an error message when confirming the coding: "Coding not accepted! Error 31: Invalid value range!"



Schaltgetriebe-Fehler.png
 Description:
 Engine control unit cannot be coded for manual transmission
 File size:  17.09 KB
 Viewed:  1149 times

Schaltgetriebe-Fehler.png


Schaltgetriebe.png
 Description:
 Engine control unit cannot be coded for manual transmission
 File size:  37.59 KB
 Viewed:  1633 times

Schaltgetriebe.png



Translated on 08-07-2026, 21:10.
Back to top Profile PM
dieselschrauber
Administrator
Administrator
Avatar-dieselschrauber

Joined: 04/12/2002
Posts: 18045
Karma: +791 / -0   Thank you, like it!
Location: St.Gallen
2018 Volkswagen T6 Consumption


Post04-06-2021, 20:26    Subject: Engine control unit cannot be coded for manual transmission Quote

Hello,

Is this engine control unit with this VAG part number available in cars with manual transmissions?

Best regards, Rainer.


Translated on 08-07-2026, 21:11.
Back to top Profile PM WWW Garage
Dracula



Joined: 03/31/2018
Posts: 12
Karma: +5 / -0   Thank you, like it!


Premium Support

Post04-06-2021, 20:53    Subject: Engine control unit cannot be coded for manual transmission Quote

Hello Rainer,
Unfortunately, I can't tell you that. I didn't realize that the transmission of the donor vehicle was so important; I would need to do some research first.


Translated on 08-07-2026, 21:12.
Back to top Profile PM
Dracula



Joined: 03/31/2018
Posts: 12
Karma: +5 / -0   Thank you, like it!


Premium Support

dieselschrauber likes this.
Post04-06-2021, 22:17    Subject: Engine control unit cannot be coded for manual transmission Quote

It appears that the software version was only available with DSG. icon_evil.gif


Translated on 08-07-2026, 21:13.
Back to top Profile PM
Dracula



Joined: 03/31/2018
Posts: 12
Karma: +5 / -0   Thank you, like it!


Premium Support

dieselschrauber, Herbert and Turbinchen likes this.
Post05-06-2021, 16:56    Subject: Engine control unit cannot be coded for manual transmission Quote

With software version 03L 906 018 RK, the problem is solved. icon_biggrin.gif


Translated on 08-07-2026, 21:14.
Back to top Profile PM
david16v



Joined: 12/28/2021
Posts: 2
Karma: +0 / -0   Thank you, like it!


Free account, no CAN development support

Post03-01-2022, 11:50    Subject: Engine control unit cannot be coded for manual transmission Quote

...I'll chime in here.

After installing a used engine control unit, I'm now experiencing a similar problem. The coding in the engine control unit is 00000000. When I try to change the coding value (regardless of the value), I always get the message "Invalid value range."

I'm also experiencing similar issues with the ABS and parking brake control units, which are also incorrectly coded.

Best regards,
David.


Translated on 08-07-2026, 21:15.
Back to top Profile PM
Dracula



Joined: 03/31/2018
Posts: 12
Karma: +5 / -0   Thank you, like it!


Premium Support

Post03-01-2022, 15:12    Subject: Engine control unit cannot be coded for manual transmission Quote

Hello David,
You need to check which coding options are allowed for the software version of your control unit, meaning which transmissions/engine features, etc., were originally available. You can only code what was originally offered. If you need a different coding, the easiest solution would be to purchase a control unit with the appropriate software version. The last two letters are crucial.


Translated on 08-07-2026, 21:17.
Back to top Profile PM
david16v



Joined: 12/28/2021
Posts: 2
Karma: +0 / -0   Thank you, like it!


Free account, no CAN development support

Post03-01-2022, 16:57    Subject: Engine control unit cannot be coded for manual transmission Quote

The problem is twofold: firstly, there is no more "original" control unit available, and secondly, the coding cannot be changed at all. For example, I cannot even change the coding to indicate that an "airbag is installed"...


Translated on 08-07-2026, 21:18.
Back to top Profile PM
Dracula



Joined: 03/31/2018
Posts: 12
Karma: +5 / -0   Thank you, like it!


Premium Support

dieselschrauber likes this.
Post03-01-2022, 19:08    Subject: Engine control unit cannot be coded for manual transmission Quote

You must enter a completely valid encoding, not just individual features.
Even if you don't have the original, you need a version with software that covers all the existing features; otherwise, it simply won't work.


Translated on 08-07-2026, 21:18.
Back to top Profile PM
New Topic Reply 🔗 ⭐ 🖨 Dieselschrauber - Index » On-Board Diagnostics (OBD)
Similar articles and topics
Topic Forum
No new posts Gear oil change T6 manual transmission Troubleshooting & Guides
No new posts Document: Flange, Wave, Gearbox 012 and 01A Faults & Documentation (Audi, VW, Seat/Cupra, Skoda)
No new posts HEX-V2: Login failed Faults & Documentation (Audi, VW, Seat/Cupra, Skoda)
No new posts Motorsteuergerät codieren Diesel Engine Technology
No new posts A3 (8P) - Lenkung codieren nicht mĂśglich wegen S3 im RNS-E? On-Board Diagnostics (OBD)
No new posts Golf VI 1.6TDI (CAYC) GRA codieren (oder auch nicht) On-Board Diagnostics (OBD)
No new posts Audi TT, Steuergerät fßr ZV lässt sich nicht codieren.... On-Board Diagnostics (OBD)
Jump to:  
You cannot post new topics in this forum.