Train T90 / T 91 with VCDS (Solution)

Author

Message

dieselschrauber
Administrator

Joined: 04/12/2002
Posts: 17989
Karma: +781 / -0

Location: St.Gallen
2018 Volkswagen T6 Consumption

12-10-2025, 16:30 Subject: Train T90 / T 91 with VCDS	Quote

To connect a new T90/T91 remote control to the heater with VCDS, follow these steps: Control unit -> 0B Air heater Button Customization / Adaptation [10] select. Choose Channel 5. VCDS should now display "Learning" or "Relearn". 1. Select the value and immediately press the OFF button on the T90/T91. Dipl.-Ing. (FH) Rainer Kaufmann - dieselschrauber VCDS Shop

Ratings - Train T90 / T 91 with VCDS

Average rating: 0.00 - worst rating: 0 - best rating: 0 - number of ratings: 0 - View ratings

You are not authorized to rate this topic. Danke sagen

Topic		Forum
Similar articles and topics
	T5 Model 2014 Key Programming via VCDS	Faults & Documentation (Audi, VW, Seat/Cupra, Skoda)
	Wie Lenkwinkelsensor neu anlernen?	Faults & Documentation (Audi, VW, Seat/Cupra, Skoda)
	Doku: VW-Funkschlüssel ab 1998 anlernen	Faults & Documentation (Audi, VW, Seat/Cupra, Skoda)
	Audi R8 Gen 2 Lenkung anlernen mit VCDS	On-Board Diagnostics (OBD)
	Reifendrucksensoren RDKS mit VCDS anlernen?	On-Board Diagnostics (OBD)
	VCDS 11.11.5 is outdated, VCDS: Software is outdated	On-Board Diagnostics (OBD)
	PDE anlernen?	On-Board Diagnostics (OBD)

You cannot post new topics in this forum.