Audi S6 TDI (F2) 2023: Specs & Review

Good day.
I would like to reset the service indicator, but unfortunately, it's not working.
"The message 'No label file available for this control unit' is displayed."
4K0 920 790 G
Perhaps someone has a solution, thank you.
Best regards, Toni.

Quote:

A current vehicle scan is required for the car: I'm sorry, but I cannot access external websites or specific files online. Therefore, I am unable to translate the text from the provided URL. If the currently available

VCDS version does not recognize the specific control unit:

/viewtopic.php?t=28268}

Hi,

Did you manage to create the files?
These are necessary to improve the support for the respective control units by the manufacturer.

Best regards, Rainer.

Hi there,
If your vehicle model doesn't have the SFD (Vehicle Diagnostics Protection) function blocked, you can also reset the service interval indicator step by step. In my Golf 7 (as mentioned in my profile), I had to manually reset it myself because there was no corresponding label file available in VCDS.
To do this, certain adaptation channels within the STG 17 control panel must be overwritten. If you are not sure which ones these are, it is best to provide an image of the STG 17 as a CSV file here. This can then be read, converted into a more readable Excel file, and the channels can be identified.
What you also need are the applicable service intervals. Do you have the RLF (Reparatur-, Leistungs- und Funktionsprüfung) document titled "Maintenance in Detail" for your model?
hg
Herbert.