| Author |
Message |
Kissenknicker Guest
Free account, no CAN development support
|
23-03-2004, 21:41 Subject: Retrofitting climate control in an Audi B4. |
Quote |
|
Hello,
I would like to convert my B4 with air conditioning to automatic climate control. I already have the heater unit with all the necessary motors. I also have the wiring harness for the control unit. What else do I need for the renovation, besides the control unit?
I am grateful for any advice and assistance. Maybe someone has already done this before.
Vehicle:
Audi 80 B4
1Z 90PS TDI
Bj.: 12/93
170.000km
Translated on 03-07-2026, 15:19.
|
|
| Back to top |
|
 |
mersente Guest
Free account, no CAN development support
|
23-03-2004, 21:45 Subject: Retrofitting climate control in an Audi B4. |
Translating... |
|
[Translating...]Hallo , Du brauchst noch Leitungen mit Druckgebern , Kompressor, Kondensator und Trockner. |
|
| Back to top |
|
 |
Kissenknicker Guest
Free account, no CAN development support
|
23-03-2004, 21:58 Subject: Retrofitting climate control in an Audi B4. |
Translating... |
|
Hallo , Du brauchst noch Leitungen mit Druckgebern , Kompressor, Kondensator und Trockner.
Ja stimmt, aber die müßte ich doch schon bei der normale Klima drinne haben, oder sind die bei der Klimaautomatik anders?
Funktionieren die Klimastellmotoren mit Unterdrück oder Überdrück? |
|
| Back to top |
|
 |
mersente Guest
Free account, no CAN development support
|
23-03-2004, 22:25 Subject: Retrofitting climate control in an Audi B4. |
Translating... |
|
[Translating...]Ach so , ich habe übersehen ,daß Du schon eine manuelle Klima hast, dann hast Du doch alles was Du brauchst. |
|
| Back to top |
|
 |
Kissenknicker Guest
Free account, no CAN development support
|
24-03-2004, 20:39 Subject: Retrofitting climate control in an Audi B4. |
Translating... |
|
[Translating...]Habe nur noch eine Frage, Die Steuerung muß ja auch mit einer Spannung versorgt werden.
Brauch man dafür noch einen zweiten Kabelbaum, der an die Boardelektronik angeschlossen wird?
Was ist mit der Fehlerausles uber die VAG Schnittstelle, funzt das auch?
Gruß Kissenknicker |
|
| Back to top |
|
 |
mersente Guest
Free account, no CAN development support
|
24-03-2004, 21:08 Subject: Retrofitting climate control in an Audi B4. |
Translating... |
|
[Translating...]Ja auslesen läßt sich die alte Klimaregelung wohl nicht.
Am besten besorgst Du dir einen Schaltplan , dann kannst Du die Kabel für die Stromversorgung selber ziehen, außerdem siehst Du dann auch was dir noch so fehlt(Relais,Temperaturgeber,etc..) |
|
| Back to top |
|
 |
Kissenknicker Guest
Free account, no CAN development support
|
24-03-2004, 21:26 Subject: Retrofitting climate control in an Audi B4. |
Translating... |
|
[Translating...]Wo bekomme ich solch einen Schaltplan her, gibt es irgendwo im Internet Informationen dazu. Evtl. sogar hier im Forum?
Gruß Kissenknicker |
|
| Back to top |
|
 |
mersente Guest
Free account, no CAN development support
|
24-03-2004, 21:28 Subject: Retrofitting climate control in an Audi B4. |
Translating... |
|
[Translating...]Ich schau morgen mal nach. |
|
| Back to top |
|
 |
mersente Guest
Free account, no CAN development support
|
25-03-2004, 21:57 Subject: Retrofitting climate control in an Audi B4. |
Translating... |
|
[Translating...]Hallo , ich habe dir den Schaltplan per Mail geschickt (ca 3MB Du willst ja auch was darauf erkennen), ich hoffe Du kommst damit weiter. |
|
| Back to top |
|
 |
Kissenknicker Guest
Free account, no CAN development support
|
26-03-2004, 21:51 Subject: Retrofitting climate control in an Audi B4. |
Translating... |
|
[Translating...]Hallo ja, hab ich heute bekommen. Sieht ganz gut aus.
Vielen Dank schon mal!!! |
|
| Back to top |
|
 |
mersente Guest
Free account, no CAN development support
|
26-03-2004, 22:16 Subject: Retrofitting climate control in an Audi B4. |
Translating... |
|
[Translating...]Kein Problem , bei Probs einfach melden. |
|
| Back to top |
|
 |