Adjust settings

Hi,

I wanted to adjust or check my circuit settings today.

Now I've encountered a problem because I don't know what function lever A is supposed to have.

[img][/img]

Should it lock the shift shaft when pressed, or what is its function?
It's very easy for me, and not much is really happening.


Sure, here's the translation:

'Thank you in advance.'http://home.arcor.de/chris_kern/teil.JPG{MARKER}

Yes, exactly, the circuit is locked in place with this 90-degree adjuster.

To do this, you need to press the part downwards as described, but not all the way.
Sometimes, there's a rumbling sound somewhere between the bottom and the top.

Unfortunately, it often breaks if you put too much force on it.
So, with feeling.

Thanks, I managed to do it, although for some reason I had to push it in and then turn it.