I have already used the search engine, but I only found results related to a baud rate of 240.
What does that mean? Is 'start baud' referring to the setting under options, which is specified as 0 there?
What other potential sources of error could there be? It worked immediately on the T4...
Does "Start Baud" refer to the setting under options, which is specified as 0 there?
That's exactly what I was looking for, but you probably already tried that.
The remaining possible sources of error are the diagnostic adapter or the computer itself.
First, you should upgrade to the latest version of VAG-COM.
Since you probably have a 'simple' interface, if the above doesn't help, your only option is to upgrade to current hardware.
Year of manufacture: before 1994 or 1994 or later?
I updated the interface to version 2.4 according to the ULF specifications.
It doesn't work with my (age less than 94) using the 303 setting, but it does work with the 311.2 setting.
ABS also works with the 303 as well.
The baud rate must be set to 240.
Try using a different computer.
1. The absence of work-related joy was evident and easily discernible.
The available laptop had a battery charge of 311.2.
3. The CD along with the associated laptop (but NOT the one mentioned in point 2).
4. I don't like driving a car when I'm wearing dirty or messy clothes.
Okay:
5. I definitely wouldn't let that happen; I wouldn't allow myself to put something together incorrectly.