VCDS and OBD diagnostic device in the On-Board Diagnostics Shop
Diesel technology, engine technology, vehicle diagnostics, repair & maintenance.

Audi A6 4B Bj.2003 - wie richtig auslesen? | Posts 16+

 
Go to page: Previous  1, 2
New Topic Reply 🔗 🖨 Dieselschrauber - Index » On-Board Diagnostics (OBD)
Author Message
KANE326
Schrauber
Schrauber


Joined: 04/30/2007
Posts: 85
Karma: +3 / -0   Thank you, like it!


Premium Support

Post13-07-2015, 7:56    Subject: Quote

HI,

"B 10240" is indicated on all control units with which I have communication.

The parking assist, climate control, and central locking systems are not communicating with me via the K-Line. icon_confused.gif
Back to top Profile PM
dieselschrauber
Administrator
Administrator
Avatar-dieselschrauber

Joined: 04/12/2002
Posts: 17992
Karma: +782 / -0   Thank you, like it!
Location: St.Gallen
2018 Volkswagen T6 Consumption


Post13-07-2015, 11:23    Subject: Quote

You have a private message.
Dipl.-Ing. (FH) Rainer Kaufmann - dieselschrauber VCDS Shop
Back to top Profile PM WWW Garage
KANE326
Schrauber
Schrauber


Joined: 04/30/2007
Posts: 85
Karma: +3 / -0   Thank you, like it!


Premium Support

Post19-07-2015, 22:36    Subject: Quote

So... it seems like the second K-line is "out of order." Because I can't access any of the control units there.
"On the 2003 C5, it's set to 'K2'."
Navigation system, radio, multifunction steering wheel, parking assist, central locking, tire pressure monitoring system, air conditioning, automatic headlight range control.

I will check a few K-Lines tomorrow to see if they are working properly icon_rolleyes.gif.
Back to top Profile PM
KANE326
Schrauber
Schrauber


Joined: 04/30/2007
Posts: 85
Karma: +3 / -0   Thank you, like it!


Premium Support

Post21-07-2015, 18:56    Subject: Quote

Update.
After disconnecting the LPG control unit from the K-K line, the diagnosis of the K1 line also works without the engine running, but with the ignition on. However, the K2 management still refuses.
Since the central locking control unit icon_rolleyes.gif is already doing whatever it wants (the interior lights sometimes turn on, sometimes not when the door is open, the remote central locking no longer works), it's time to replace it.

I'll report back.
Back to top Profile PM
DieselBär30x
Profi-Schrauber
Profi-Schrauber
Avatar-DieselBär30x

Joined: 01/17/2008
Posts: 3563
Karma: +101 / -0   Thank you, like it!
Location: München & Passau

Premium Support

Post21-07-2015, 19:07    Subject: Quote

Hey Kanne! icon_wink.gif
KANE326 wrote:
... does whatever it wants, (interior lights turn on and off randomly when the door is opened, ...

Please check the microswitches in the door locks icon_exclaim.gif.
Don't exchange the StG for nothing.

Best regards from Munich!
1. S.verlängerung: Audi A4 Avant quattro, 1,9 TDi MKB: AFN, BJ98, Vollausstattung, +VP1L
2. Moped BMW K1200RS, 130 PS, BJ98, Vollausst.
3. T5 1,9 TDI PD (AXC), BJ04 - nur Ärger!
Back to top Profile PM
dieselschrauber
Administrator
Administrator
Avatar-dieselschrauber

Joined: 04/12/2002
Posts: 17992
Karma: +782 / -0   Thank you, like it!
Location: St.Gallen
2018 Volkswagen T6 Consumption


Post21-07-2015, 20:00    Subject: Quote

@KANE326Viewing profile: KANE326: Could you please remember some of the values I mentioned? Because otherwise, I can't assess whether the proposed action makes sense or not. icon_idea.gif

Best regards, Rainer.
Dipl.-Ing. (FH) Rainer Kaufmann - dieselschrauber VCDS Shop
Back to top Profile PM WWW Garage
KANE326
Schrauber
Schrauber


Joined: 04/30/2007
Posts: 85
Karma: +3 / -0   Thank you, like it!


Premium Support

Post21-07-2015, 20:13    Subject: Quote

All door locks are new icon_wink.gif.
Back to top Profile PM
KANE326
Schrauber
Schrauber


Joined: 04/30/2007
Posts: 85
Karma: +3 / -0   Thank you, like it!


Premium Support

Post25-07-2015, 18:02    Subject: Quote

Nothing is working anymore. Neither with the engine running, nor with just the ignition on.
With the new central control unit, at least the interior lighting responds when the unit is queried; it briefly flashes, but the control unit still doesn't provide a response.

I can't access any control units. Not even a motor icon_cry.gif.
Back to top Profile PM
KANE326
Schrauber
Schrauber


Joined: 04/30/2007
Posts: 85
Karma: +3 / -0   Thank you, like it!


Premium Support

Post27-07-2015, 15:14    Subject: Quote

Okay, so I just went to Audi/VW... and they also said that it's not on any of the control units in the K2 line. Speaking: We tested the ZV (central ventilation) and climate control systems. "Not available."

Now, I could potentially rewire the K-line from the central locking control unit and connect it directly. icon_rolleyes.gif
Back to top Profile PM
New Topic Reply 🔗 🖨 Dieselschrauber - Index » On-Board Diagnostics (OBD)
Go to page: Previous  1, 2
Similar articles and topics
Topic Forum
No new posts Doku A2 8Z0 MJ 2003, Heckspoiler gebrochen Faults & Documentation (Audi, VW, Seat/Cupra, Skoda)
No new posts Doku A2 8Z0 MJ 2003, Hands-free device malfunction Faults & Documentation (Audi, VW, Seat/Cupra, Skoda)
No new posts Doku A2 8Z0 MJ 2003, Geräusche aus dem Vorderwagen Faults & Documentation (Audi, VW, Seat/Cupra, Skoda)
No new posts Servolenkung Audi A3 Bj. 2003 defekt Transmission, Chassis, Body & Interior
No new posts Looking for Audi A4, year 2003, with VAG COM / Channel Ov... On-Board Diagnostics (OBD)
No new posts Audi A3 8L Bj 06/2003 Chorus II problem Transmission, Chassis, Body & Interior
No new posts Audi A2 auslesen mit VAG 1551? On-Board Diagnostics (OBD)
Jump to:  
You cannot post new topics in this forum.