VCDS and OBD diagnostic device in the On-Board Diagnostics Shop
Wrenchers and tuners: diesel, petrol, OBD/VCDS. Repair, maintenance, diagnostics - help that's proven on the car.

G40 Sensor Replacement: Audi A3 8V 2.0 TDI

 
New Topic Reply 🔗 ⭐ 🖨 Dieselschrauber - Index » Diesel Engine Technology
Author Message
maupiiii
Guest




 


Free account, no CAN development support

Post04-09-2017, 8:58    Subject: G40 Sensor Replacement: Audi A3 8V 2.0 TDI Quote

Hello everyone,

The G40 camshaft position sensor is defective on our A3 8V 2.0 TDI CR 150 HP.
The vehicle occasionally starts very poorly, and the G40 sensor is showing an error in the diagnostic memory.

Does the timing belt need to be removed to replace the G40? Or does the rear timing belt cover need to be removed, which would mean the camshaft wheel needs to be removed, and therefore the timing belt would need to be removed again?

Please provide information.

Thank you and best regards.


Translated on 21-10-2026, 3:39.
Back to top
New Topic Reply 🔗 ⭐ 🖨 Dieselschrauber - Index » Diesel Engine Technology
Similar articles and topics
Topic Forum
No new posts P246E - Exhaust Gas Temperature Sensor (EGS) Bank 1 Sensor 4 General Tips
No new posts Intake Air Temp Sensor P0110: Causes & Fixes General Tips
No new posts P0341 - Camshaft Position Sensor (G40): Implausible Signal Faults & Documentation (Audi, VW, Seat/Cupra, Skoda)
No new posts Camshaft Replacement Audi V6 TDI: What Else? Diesel Engine Technology
No new posts TDI Audi 80: Replace Crankshaft Position Sensor? Diesel Engine Technology
No new posts Replacing control arm bushings on an Audi 80 TDI Transmission, Chassis, Body & Interior
No new posts Audi Diesel: Common Rail Technology Explained Diesel Engine Technology
Jump to:  
You cannot post new topics in this forum.