Airbag Polo 6R | Posts 16+

Quote:

If you would like to go to the trouble (for us), and the vehicle is mainly used for solo operation, it would be interesting to re-solder and test the reinstallation

.
The error was, in reality, too sporadic to be easily reproduced.
hg
Herbert.

Hi HerBärt!

Yes, exactly that kind of behavior is characteristic of cold solder joints .

Best regards from Munich!

Lead-free solder. That's all I'm saying! The solution would be to vacuum out the old solder and re-solder with leaded solder. I would do it like this and try it out.
Ultimately, you've already made your decision.

Exactly. The car is now running without any problems.
I would be happy to provide the switch for scientific purposes, for a shipping fee.
hg
Herbert.

Hello everyone,

I am now experiencing the exact same problem as described above.

I had the error removed, but it reappeared after about 2 weeks.

I would like to replace the switch now.
The switch installed in my Polo has the following number:
1K0 919 237 E

Unfortunately, I can hardly find any spare parts with the E at the end, but I do find many with a C or D.

Can someone tell me if the parts with the different ending letters are 1:1 compatible?