VCDS and OBD diagnostic device in the On-Board Diagnostics Shop
Wrenchers and tuners: diesel, petrol, OBD/VCDS. Repair, maintenance, diagnostics - help that's proven on the car.

VAG-COM Login Issues: AFB Engine Troubleshooting

 
Go to page: 1, 2  Next
New Topic Reply 🔗 ⭐ 🖨 Dieselschrauber - Index » Diesel Engine Technology
Author Message
avoso
Guest




 


Free account, no CAN development support

Post15-09-2002, 21:15    Subject: VAG-COM Login Issues: AFB Engine Troubleshooting Quote

Hello,
I've been trying to increase the starting fuel injection volume of my engine for days now, but I can't seem to log in to the VAG-Com software!
I learned in this forum that the generally accepted code for adapting the engine control unit is 12233. The error message I'm receiving is: 'Too many communication errors to continue!'
The problem clearly lies with the access code or the control unit, because I can successfully log in on my Seat Leon, for example! I've also tried a different computer, but it doesn't work on my Audi either!
Since my Audi has an engine installed that came from an Audi manufactured in 2000, I unfortunately can't say for sure which specific engine it is. The registration documents indicate 'AFB,' but it could also be 'AKN'! (Are there any other access codes available?)

Thank you in advance for your replies!
Best regards,
Achim


Translated on 05-10-2026, 23:24.
Back to top
Michael II
Profi-Schrauber
Profi-Schrauber


Joined: 04/12/2002
Posts: 1132
Karma: +3 / -0   Thank you, like it!
Location: Stuttgart

Support

Post16-09-2002, 7:15    Subject: VAG-COM Login Issues: AFB Engine Troubleshooting Quote

Hello,

If the problem is with the access code, you would receive the error message "Login code not accepted."
The error message you're seeing likely indicates a problem with the insecure communication between the diagnostic system and the control unit.
Please take a look at the programmer's homepage. It contains various default settings and workarounds for communication problems.
Tschüss

Michael II


Translated on 05-10-2026, 23:25.
Back to top Profile PM
avoso
Guest




 


Free account, no CAN development support

Post17-09-2002, 19:41    Subject: VAG-COM Login Issues: AFB Engine Troubleshooting Quote

Thank you for the quick response!

I browsed the homepage of the programmer UweRoss and found some helpful information there. It mentioned: 'Troubleshooting issues with background programs and ensuring a stable power supply for the laptop!'
I followed these instructions, but I still can't log in to the control unit!
I will now look for a different program!

Best regards,
Achim


Translated on 05-10-2026, 23:26.
Back to top
Stefan
Guest




 


Free account, no CAN development support

Post18-09-2002, 7:25    Subject: VAG-COM Login Issues: AFB Engine Troubleshooting Quote

Try using VCDS 2.9.
While the program runs on DOS, it offers more features than VAG-COM.
and works more safely. I've completely switched over.


Translated on 05-10-2026, 23:27.
Back to top
avoso
Guest




 


Free account, no CAN development support

Post18-09-2002, 20:03    Subject: VAG-COM Login Issues: AFB Engine Troubleshooting Quote

Hello Stefa,

Please give me a tip on where I can find software!

Best regards, Achim.


Translated on 05-10-2026, 23:28.
Back to top
GarfieldMZ
Guest




 


Free account, no CAN development support

Post20-09-2002, 22:36    Subject: Same problem here! Quote

Hello Achim!

A few months ago, I tried the exact same thing on my A6, and I failed at the login stage. Unfortunately, I haven't been able to succeed yet, and I've even given up because no one has been able to really help me. However, I have a 1998 AFB...
If you or someone else perhaps still has a tip, they can feel free to send it to me icon_smile.gif.
THANK YOU!

DENNIS


Translated on 05-10-2026, 23:28.
Back to top
ulf
Profi-Schrauber
Profi-Schrauber


Joined: 04/13/2002
Posts: 11058
Karma: +18 / -0   Thank you, like it!
Location: Saarland
2023 MG ZS
Premium Support

Post21-09-2002, 8:08    Subject: DIY Adapter: Build Your Own! Quote

Hi everyone,

If you have a self-built adapter that follows the specifications of Noxon or Stautz, the problem might be with that adapter.
--> In this case, the on-board electronics have to work very hard to transmit low-level signals to the PC, which can lead to data loss or timing inaccuracies, etc.

Suggestion for a solution:
Solder a 15 kOhm resistor in parallel with the base-emitter path of the transistor that drives the "response optocoupler" and is connected to the K-line with approximately 150 kOhm.

Possibly increase R7 (originally 1 kOhm) and R3 (between pin 2 and 4 of the PC interface, originally 1.5 kOhm) to approximately 2.2 to 3.3 kOhm.

If commercially available adapters were to replicate these bugs "blindly," they could naturally cause the same problems icon_evil.gif.
Gruß Ulf
_________

MG4 Electric


Translated on 05-10-2026, 23:30.
Back to top Profile PM Garage
GarfieldMZ
Guest




 


Free account, no CAN development support

Post21-09-2002, 16:29    Subject: DIY Adapter: Build Your Own! Quote

Hello Ulf!

Everything else actually works perfectly for me! It's just the login that's not working... maybe I'm doing something wrong!?

The only strange thing I've noticed is that when logging data, the measurement blocks suddenly lose connection when you reach the area of maximum speed.

P.S.: I bought a ready-made cable...

DENNIS


Hi everyone.

If you have a self-built adapter that follows the specifications of Noxon or Stautz, the problem might be with that adapter.
--> In this case, the on-board electronics have to work very hard to transmit low-level signals to the PC, which can lead to data loss or timing inaccuracies, etc.

Suggestion for a solution:
Solder a 15 kOhm resistor in parallel with the base-emitter path of the transistor that drives the 'response optocoupler' and is connected to the K-line with approximately 150 kOhm.

Possibly increase R7 (originally 1 kOhm) and R3 (between pin 2 and 4 of the PC interface, originally 1.5 kOhm) to approximately 2.2 to 3.3 kOhm.

If commercially available adapters are 'blindly' replicated with these bugs, they can naturally cause the same problems icon_evil.gif.


Translated on 05-10-2026, 23:33.
Back to top
ulf
Profi-Schrauber
Profi-Schrauber


Joined: 04/13/2002
Posts: 11058
Karma: +18 / -0   Thank you, like it!
Location: Saarland
2023 MG ZS
Premium Support

Post21-09-2002, 19:02    Subject: DIY Adapter: Build Your Own! Quote

GarfieldMZ wrote:
Everything else actually works perfectly for me! Only the login doesn't work... maybe I'm doing something wrong!?

The only strange thing I've noticed is that when logging data, the measurement blocks suddenly lose connection when you reach the area of maximum speed.

P.S.: I bought a ready-made cable...


Hi Dennis,
What does the communication monitoring (top left corner of the VAGCOM screen) say on your system?
The optimal display values are: IC = 1, TE and BE = 0 each.

As soon as something else is displayed, the connection becomes "unstable," which could be due to the adapter.

My homemade part passed its first test today.
It works great - including the x number of logins and adaptations - although (or because icon_question.gif icon_question.gif icon_twisted.gif) I deviated from Noxon's circuit diagram in some points.
Gruß Ulf
_________

MG4 Electric


Translated on 05-10-2026, 23:36.
Back to top Profile PM Garage
avoso
Guest




 


Free account, no CAN development support

Post22-09-2002, 10:29    Subject: VAG-COM Login Issues: AFB Engine Troubleshooting Quote

Hello Ulf,
Is there a possibility for you to send me a schematic diagram of your optimized cable? Unfortunately, it is impossible for me to modify my cable, as it has been completely cast in resin - someone was probably afraid that it could be copied icon_lol.gif.
I would be really very interested to know whether these completely overpriced 'original' cables are unusable!

Best regards, Achim.


Translated on 05-10-2026, 23:38.
Back to top
ulf
Profi-Schrauber
Profi-Schrauber


Joined: 04/13/2002
Posts: 11058
Karma: +18 / -0   Thank you, like it!
Location: Saarland
2023 MG ZS
Premium Support

Post22-09-2002, 17:21    Subject: VAG-COM Login Issues: AFB Engine Troubleshooting Quote

avoso wrote:
Is there a possibility for you to send me a schematic diagram of your optimized cable?


Hi Achim,

I'll email it to you right away.

@ all:

I'll also email it to Rainer. Maybe he can find a place to make it available for download.
Gruß Ulf
_________

MG4 Electric


Translated on 05-10-2026, 23:38.
Back to top Profile PM Garage
Rudi
Guest




 


Free account, no CAN development support

Post22-09-2002, 20:58    Subject: VAG-COM Login Issues: AFB Engine Troubleshooting Quote

Hi,

@Avoso, Garfield:

Yesterday, I visited my friendly parts supplier and asked him about modified login procedures for newer TDI models.
He was quite certain that the universal codes (like 12233, etc.) no longer exist, but instead individual codes are used, which are derived by combining the STG serial number. Audi is said to have started the transition before Volkswagen.

I can't say for sure if it's true, but with my '96 STG, I haven't had any problems logging in with any adapters so far.

Best regards, Rudi.


Translated on 05-10-2026, 23:40.
Back to top
avoso
Guest




 


Free account, no CAN development support

Post23-09-2002, 9:45    Subject: VAG-COM Login Issues: AFB Engine Troubleshooting Quote

Hello Ulf,
Thank you for your message!
I will let you know during the week whether the adapter works for me!

Best regards,
Achim


Translated on 05-10-2026, 23:40.
Back to top
GarfieldMZ
Guest




 


Free account, no CAN development support

Post23-09-2002, 13:45    Subject: "It's not working":-( Quote

Hello everyone!

I just tried it again and attempted to change the initial value. icon_sad.gif It doesn't work on my A6 with the AFB engine from 05/98. icon_sad.gif On my control unit, I can access the adaptation for the idle speed WITHOUT logging in, and I can also change and save it. However, as soon as I enter the login code 12233, the control unit crashes the program and only allows it to run again after the ignition has been turned off for about 1 minute.
It would be quite unfortunate if it only works with the calculated code, because then you probably wouldn't have any more chance to change the other values }.

Please let me know if there's a way to do it, even if it seems unlikely!

Thank you and best regards.

DENNIS


Translated on 05-10-2026, 23:42.
Back to top
Rudolf
Guest




 


Free account, no CAN development support

Post11-03-2003, 17:38    Subject: Login Issues: Troubleshooting & Solutions Quote

Okay, I'm having the exact same problem with my Audi A6, model year 1995. I've been following the instructions regarding the variable login code, but the people at the workshop don't know anything about it. So, if anyone has already solved this problem, please let me know.

THANK YOU!!!!!


Translated on 05-10-2026, 23:43.
Back to top
joergs
Guest




 


Free account, no CAN development support

Post11-03-2003, 17:47    Subject: VAG-COM Login Issues: AFB Engine Troubleshooting Quote

If I understand Michael II correctly, the adaptation options from one stage to another vary. With some stages, you can adapt this or that channel, while with others, you cannot.
With my original 1Z control unit, I am also unable to adapt channel 4, while it works with the replacement unit!


Translated on 05-10-2026, 23:44.
Back to top
New Topic Reply 🔗 ⭐ 🖨 Dieselschrauber - Index » Diesel Engine Technology
Go to page: 1, 2  Next
Similar articles and topics
Topic Forum
No new posts Touran 1T: Fueling Problems & Troubleshooting Faults & Documentation (Audi, VW, Seat/Cupra, Skoda)
No new posts Login Codes TDI / VAG Faults & Documentation (Audi, VW, Seat/Cupra, Skoda)
No new posts HEX-V2: Login failed Faults & Documentation (Audi, VW, Seat/Cupra, Skoda)
No new posts Problems with the BSU engine (VW Caddy) Diesel Engine Technology
No new posts Problems reading measurement blocks from 1Z engine On-Board Diagnostics (OBD)
No new posts AEL Motor Login Code: Start Quantity Example On-Board Diagnostics (OBD)
No new posts A4 AFB Engine Problems: Common Issues & Fixes Diesel Engine Technology
Jump to:  
You cannot post new topics in this forum.