Program Daytime Running Lights?

Can anyone tell me how to program the daytime running lights on a VW Polo 9N?

Which specific 9N are you referring to?

SGM

What exactly do you need?

VW Polo.
Model 9N11B4C4.
Date of manufacture: June 2005.

Okay, so, there's nothing you can do with coding on your Polo.
The only solution is the TFL "bridge" on the light switch.
Pin 3 to pin 7.

SGM

Do I need to tamper with the light switch there? Or how can I understand that?

Remove the light switch and create a connection (a "bridge") between pin 3 (which is currently unconnected) and pin 7 (which already has a cable connected to the low beam headlight) on the plug (not the switch itself).
Dazu holst du dir am Besten beim eine Reparaturleitung wo zwei Stecker drauf sind, wo du einen bei Pin 3 einsteckst und dann das zweite Ende mit dem Kabel an Pin7 (mittels Stromdieb oder verlöten) verbindest. Ready.

SGM

THANKS for the information!
But with the VW Touran, shouldn't it be done through VCDS (formerly VagCom)?

You will find what you're looking for in the body control module (with its long code).

m;

How do I activate the daytime running lights?
I don't quite understand that .

Yes, with the Touran, it also works with [url=http://de.openobd.org/faq.htm#longcoding]long coding.

-Uwe-

Okay!
What are "assistenzfahrlicht" and "leaving home" features?
What happens if I activate this?

Can I activate this feature on a VW Touran Trendline CH/LH, or does it need to be retrofitted?