Document A3, 8 liters, up to 2000, Error entry in the airbag control unit. (Solution)

In the airbag control unit's memory, there is an entry: "Ignition for side airbag - resistance value too high". The error can be either intermittent or static.

Cause:
The yellow connector under the driver and passenger seats is contaminated due to the manufacturing process.

Solution:
The entire connector must be replaced, meaning the connector on the vehicle-side cable harness must be re-attached, and the side airbag module must be replaced, as the cable here cannot be repaired.
Important:
When performing these tasks, it is essential to maintain the highest possible level of cleanliness to prevent re-contamination of the connector.