Michael II Profi-Schrauber

Joined: 04/12/2002 Posts: 1135 Karma: +3 / -0 Location: Stuttgart
CAN Support
|
09-01-2003, 13:49 Subject: Document: Performance loss over time, MKB AFB, AKN, AKE, AYM |
Quote |
|
Gradual performance loss over time, jerky operation and irregular engine running.
AFB/AKN/AKE/AYM - V6 TDI Engine
Affected Chassis Numbers:
Until: 8E92A 125234
Due to: 4D22N 003699
Due to: 4B22N 046559
Cause:
Possible significant wear of camshafts with deep grooves on the cam lobes in the millimeter range, approximately from 150,000 km, due to the combination of unfavorable tolerances. Irregular engine running and jerking due to changed valve opening angles.
KD-Solution
In case of complaint, specifically hardened camshafts must be installed. As long as the cylinder heads, connecting rods, and hydraulic lifters are in good condition, their replacement is not necessary when using the hardened camshafts.
Share numbers:
Intake Cylinder 4-6 left ......... 059-109-021 P
Entrance Cylinder 1-3 right ...... 059-109-021 Q
Exhaust Cylinder 4-6 left ..... 059-109-022 P
Exhaust Cylinder 1-3 right .. 059-109-022 Q Tschüss
Michael II |
|