Roof Rail Clamp Tightening Torque 1Z (or other PQ35)

Hello everyone,

weiß jemand zufällig, mit welchem Anzugsmoment man die Torxschrauben (T30, glaube ich) der Dachreling beim Octavia 2 Combi (1Z) festschrauben muss?

I suspect that this is built identically on other PQ35 cars... here, there are recesses in the roof with embedded nuts, onto which the rail is then placed with rubber seals and fastened with the same screws.

I'm concerned about preventing a leak, so I definitely don't want to tighten it too loosely, but also not so tightly that I damage the non-replaceable threaded parts.

Best regards,

Jan

Hello Jan,

For the A3 8PA, M6 screw bolts/nuts with 10Nm are used. On your side, the mounting looks different.

Best regards, Rainer

Watched Elsa for 2011 1Z combo: 10Nm.

Hi,

Thank you very much!

Best regards,

Jan