VCP drivers for HEX-USB+CAN are missing!/?

Hello everyone,

After a very long absence from the forum, I'm back and unfortunately reporting about a serious issue.

I'm currently sitting far away from any civilization in the mountains with a 2007 Subaru Forester 2.5 XT, and this piece of junk keeps going into limp mode all the time.

I have FreeSSM installed on my laptop, as well as the usual HEX-USB+CAN device. However, I've just realized that I never installed the VCP driver on this laptop, and I can't even find the driver in the shop anymore. Am I being too dense to find it? Can someone help me with a link?

Best regards,

Okay, please provide the German text you would like me to translate into English. I will only provide the translation.

Ste.Bo wrote:

FreeSSM habe ich auf dem Laptop dabei, das HEX-USB+CAN sowieso wie immer auch. Nun merke ich aber, dass ich auf diesem Laptop den VCP nie installiert habe, finde den Treiber aber auch im Shop nicht mehr.

I'm not familiar with Subarus or what you need for them. But if you're looking for the COM port driver, it appears as the first item in the software downloads section of the shop.
Software downloads / Installation packages.

COM port emulation driver for using the HEX/KEY K-line with third-party software. (808.69 kB)
https://shop.dieselschrauber.org/en/download.php?pd=15

Thank you! I just couldn't find it a little while ago.

Yes, everything is still there:

Alle zu den gekauften Produkten gehörende Software ist im Kundenaccount vom Shop zu finden.
https://shop.dieselschrauber.org/en/account.php