Coding trailer hitch, missing SFD tokens

Hello everyone,

Today, I installed a tow hitch on a Skoda Octavia (manufactured in 2022). Unfortunately, I was unable to perform the required coding because the control unit is locked and the message "Missing tokens" is displayed.
Has anyone else experienced a similar problem, or does anyone know how to proceed with the encoding?
Thank you in advance for your support!


Vehicle Identification Number: TMBJW8NX9PY010190 License plate:

Gateway part list: 5WA 907 530 L.
01-Motor electronics -- Status: OK 0000
02-Gearbox -- Status: OK 0000
03-Brake electronics -- Status: OK 0000
05-Access/Startup Report -- Status: OK 0000
08-Climate/Heating Unit -- Status: OK 0000
09-Central Electrical System -- Status: Error 0010.
10-Parking assist -- Status: Error 0010.
13-meter distance rule -- Status: OK 0000
15-Airbag -- Status: OK 0000
17-Terminal block insert -- Status: OK 0000
19-Diagnosis interface -- Status: OK 0000.
23-Brake force amplifier -- Status: OK 0000
2B steering column lock. -- Status: OK 0000
42-door electric. Driver -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
4B Multifunction Device -- Status: OK 0000
51-Electric drive -- Status: OK 0000.
52-door electric. Front passenger seat. -- Status: OK 0000.
5F-Information Selection. I -- Status: Error 0010
75-Telematics -- Status: OK 0000
8C High-Voltage Battery Management -- Status: OK 0000
A5 Front/Forward-facing camera -- Status: Error 0010.
Rear left door electronics -- Status: unreachable 0100.
Rear right-side door electronics -- Status: unreachable 0100.
C6 battery charger -- Status: OK 0000
D6-Left lighting control 2 -- Status: OK 0000
D7-Light control, right side, 2 -- Status: OK 0000.
811E Burglar Protection - Status: OK 0000
811F Burglar Protection System -- Status: Operational 0000.
8120-Burglary Protection System -- Status: Operational 0000
8121-Burglary protection HR -- Status: OK 0000

Hello,

Okay, the current status is:
https://community.dieselschrauber.org/en/viewtopic.php?t=31009

SFD: Yes/No:
https://community.dieselschrauber.org/en/viewtopic.php?t=31954

SFD Unlock: Yes/No
https://community.dieselschrauber.org/en/viewtopic.php?t=31953

If you've made it this far, please query the SFD data from the relevant control unit and send it to me along with the Autoscan results.

Best regards, Rainer.